HP ProDesk 400 G2.5 SFF vs. HP ProDesk 600 G5 Mini

Comparison and Differences

HP_ProDesk_400_G2.5_SFF.jpg case front and back pannelHP_ProDesk_600_G5_Mini.jpg case front and back pannel
Model
Form factorSmallMicro
CPU optionsIntel Gen4 i3/i5/i7; Celeron; Pentium;Intel Gen8&9 i3/i5/i7; Celeron; Pentium;
ChipsetH81Q370
Dedicated GPU *GeForce GT 1030 Low ProfileN.A.
RAMDIMM DDR3-1600 SODIMM DDR4-2666
RAM slots22
RAM speed1600 MT/s2666 MT/s
RAM max16 GB64 GB
USB ports(2x)USB-A 3.0; (6x)USB-A 2.0; USB-C 3.1; (3x)USB-A 3.1; (3x)USB-A 3.0;
Video portsDisplayPort; VGA;(2x) DisplayPort:
Other portsRJ45; Hdph; Mic; Line-Out; Line-In; Serial; (2x) PS2;RJ45; Headset; Hdph;
Optional portsMedia card reader; Serial; Parallel; DP1.2/HDMI2.0/VGA/USB-C(DP)/Serial; WiFi antenna;
SATA ports31
PCI slotsPCIe x16; PCIe x1; N.A.
M.2 slotsN.A.(2x) M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT);
Drive bays3.5in; 5.25in (slim)2.5in;
PSU180 W65 W
Weight4.5 kg (9.92 lb)1.24 kg (2.74 lb)
Released20142018
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between HP ProDesk 400 G2.5 SFF and HP ProDesk 600 G5 Mini

If you are looking for a more modern desktop, then you should go with the HP ProDesk 600 G5 Mini which was released in 2018. The HP ProDesk 400 G2.5 SFF is older and entered production in 2014.

If you are looking for the smaller form factor the HP ProDesk 600 G5 Mini is the right one for you. It is smaller than the HP ProDesk 400 G2.5 SFF and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP ProDesk 600 G5 Mini as it is running a newer generation CPU. This is not to say that HP ProDesk 400 G2.5 SFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The HP ProDesk 600 G5 Mini is using the faster 2666 MT/s RAM. The HP ProDesk 400 G2.5 SFF is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the HP ProDesk 600 G5 Mini as it has the ability to run 64 GB of RAM. The HP ProDesk 400 G2.5 SFF can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the HP ProDesk 400 G2.5 SFF has 8 USB ports. The HP ProDesk 600 G5 Mini is inferior in this regard and packs 7 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the HP ProDesk 600 G5 Mini, is that it has 4 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the HP ProDesk 400 G2.5 SFF has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the HP ProDesk 600 G5 Mini comes with 2 ports, while the HP ProDesk 400 G2.5 SFF has only 1. If you are planning to use multiple monitors, the HP ProDesk 600 G5 Mini is the better choice.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the HP ProDesk 400 G2.5 SFF is better equipped as it comes with 3 SATA slot(s), while the HP ProDesk 600 G5 Mini has 1 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the HP ProDesk 600 G5 Mini. Sadly, the HP ProDesk 400 G2.5 SFF has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 600 G5 Mini comes with a decent 65 Watt PSU, but the HP ProDesk 400 G2.5 SFF has a more powerful one rated at 180 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

HP_ProDesk_400_G2.5_SFF_motherboard.jpg motherboard layoutHP_ProDesk_600_G5_Mini_motherboard.jpg motherboard layout