Dell OptiPlex 3070M vs. Dell XPS 8930

Comparison and Differences

Dell_OptiPlex_3070M.jpg case front and back pannelDell_XPS_8930.jpg case front and back pannel
Model
Form factorMicroMini Tower
CPU optionsIntel Gen8&9 i3/i5/i7; Celeron; Pentium;Intel Gen8 i3/i5/i7;
ChipsetH370Z370
Dedicated GPU *N.A.GeForce RTX 2060 Super
RAMSODIMM DDR4-2400/2666DIMM DDR4-2666/2933
RAM slots24
RAM speed2666 MT/s2666 MT/s
RAM max32 GB64 GB
USB ports(4x) USB-A 3.0; (2x) USB-A 2.0; USB 3.1 Type C; USB 3.1 Type A; (2x) USB-A 2.0; (6x) USB-A 3.0;
Video portsDisplay Port 1.2; HDMI 1.4;HDMI 1.4; DisplayPort 1.2;
Other portsRJ45; Headset; Line-Out; RJ45; Mic; Headset; Card Reader;
Optional portsDP1.2/HDMI2.0/VGA/Serial+PS2/Serial; (2x) WiFi antenna;N.A.
SATA ports13
PCI slotsN.A.PCIe 3.0 x16; (x2) PCIe x4;
M.2 slotsM.2 2280/2230 M-key (PCIe 2.0 x4, NVMe); M.2 2230 (WiFi/BT) M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT);
Drive bays2.5in;(3x) 3.5in;
PSU65 W460 W
Weight1.18 kg (2.60 lb)8.20 kg (18.08 lb)
Released20192017
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 3070M and Dell XPS 8930

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 3070M which was released in 2019. The Dell XPS 8930 is older and entered production in 2017.

If you are looking for the smaller form factor the Dell OptiPlex 3070M is the right one for you. It is smaller than the Dell XPS 8930 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 3070M as it is running a newer generation CPU. This is not to say that Dell XPS 8930 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Dell XPS 8930 has 4 RAM slots while the Dell OptiPlex 3070M has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

None of the desktops has an advantage when it comes to the speed of the RAM being used. Both models support RAM speeds of up to 2666. Additionally, if you will be needing a lot of RAM, better go for the Dell XPS 8930 as it has the ability to run 64 GB of RAM. The Dell OptiPlex 3070M can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell XPS 8930 has 10 USB ports. The Dell OptiPlex 3070M is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Dell XPS 8930, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell OptiPlex 3070M has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

In case your monitor supports HDMI only, you will be happy to hear that both models come with an HDMI port.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell XPS 8930 is better equipped as it comes with 3 SATA slot(s), while the Dell OptiPlex 3070M has 1 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 3070M comes with a decent 65 Watt PSU, but the Dell XPS 8930 has a more powerful one rated at 460 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_3070M_motherboard.jpg motherboard layoutDell_XPS_8930_motherboard.jpg motherboard layout