Dell OptiPlex 5090 MT vs. Fujitsu Esprimo D538

Comparison and Differences

Dell_OptiPlex_5090_MT.jpg case front and back pannelFujitsu_Esprimo_D538.jpg case front and back pannel
Model
Form factorMini TowerSmall
CPU optionsIntel Gen10&11 i3/i5/i7;Intel Gen8&9 i3/i5/i7; Pentium; Celeron
ChipsetQ570H310
Dedicated GPU *GeForce GTX 1660 SuperRadeon RX 6400 Low Profile
RAMDIMM DDR4-2666/2933/3200UDIMM DDR4-2666
RAM slots42
RAM speed3200 MT/s2666 MT/s
RAM max128 GB32 GB
USB portsUSB 3.1 Type C; (x5) USB-A 3.0; (x4) USB-A 2.0;(4x) USB-A 3.0; (4x) USB-A 2.0
Video ports(4x) Display Port 1.4; (x3) HDMI 2.0b; VGA;DisplayPort 1.2; DVI
Other portsRJ45; Headset; Line-Out/In;RJ45; Headphones; Mic; Line in; Line out; PS/2
Optional portsVGA /DisplayPort 1.4/HDMI 2.0b/USB 3.2 Gen2 Type-C Port Alt-mode; SD Card;VGA; eSATA
SATA ports43
PCI slotsPCIe 4.0 x16; PCIe 4.0 x4; (x2) PCIe x1;PCIe 3.0 x16; PCIe 2.0 x16 (wired x4)
M.2 slotsM.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT) M.2 2280/2230 M-key (PCIe 2.0 x2, NVMe)
Drive bays(x2) 3.5in; (2x) 2.5in; 5.25in (slim);3.5in; 2.5in; 5.25 inch
PSU260/300/360 W210/280 W
Weight7.24 kg (15.95 lb)5.00 kg (11.03 lb)
Released20212018
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 5090 MT and Fujitsu Esprimo D538

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 5090 MT which was released in 2021. The Fujitsu Esprimo D538 is older and entered production in 2018.

If you are looking for the smaller form factor the Fujitsu Esprimo D538 is the right one for you. It is smaller than the Dell OptiPlex 5090 MT and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 5090 MT as it is running a newer generation CPU. This is not to say that Fujitsu Esprimo D538 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Dell OptiPlex 5090 MT has 4 RAM slots while the Fujitsu Esprimo D538 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Dell OptiPlex 5090 MT is using the faster 3200 MT/s RAM. The Fujitsu Esprimo D538 is slower by supporting RAM speeds of up to 2666 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 5090 MT as it has the ability to run 128 GB of RAM. The Fujitsu Esprimo D538 can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell OptiPlex 5090 MT has 10 USB ports. The Fujitsu Esprimo D538 is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Dell OptiPlex 5090 MT, is that it has 3 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Fujitsu Esprimo D538 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Dell OptiPlex 5090 MT comes with 4 ports, while the Fujitsu Esprimo D538 has only 1. If you are planning to use multiple monitors, the Dell OptiPlex 5090 MT is the better choice.

The Dell OptiPlex 5090 MT comes with an HDMI port, while the Fujitsu Esprimo D538 does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 5090 MT is better equipped as it comes with 4 SATA slot(s), while the Fujitsu Esprimo D538 has 3 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo D538 comes with a decent 280 Watt PSU, but the Dell OptiPlex 5090 MT has a more powerful one rated at 360 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_5090_MT_motherboard.jpg motherboard layoutFujitsu_Esprimo_D538_motherboard.jpg motherboard layout