Fujitsu Esprimo D958 vs. HP ProDesk 600 G5 SFF

Comparison and Differences

Fujitsu_Esprimo_D958.jpg case front and back pannelHP_ProDesk_600_G5_SFF.jpg case front and back pannel
Model
Form factorSmallSmall
CPU optionsIntel Gen8&9 i3/i5/i7Intel Gen8&9 i3/i5/i7; Celeron; Pentium;
ChipsetQ370Q370
Dedicated GPU *Radeon RX 6400 Low ProfileGeForce GT 1030 Low Profile
RAMUDIMM DDR4-2666DIMM DDR4-2666
RAM slots44
RAM speed2666 MT/s2666 MT/s
RAM max64 GB128 GB
USB ports(4x) USB-A 3.0; (4x) USB-A 2.0; (2x) USB-C 3.1; USB-C 3.1USB-C 3.1; (4x)USB-A 3.1; (2x)USB-A 3.0; (4x)USB-A 2.0;
Video ports(2x) DisplayPort 1.2; DVI(2x) DisplayPort:
Other portsRJ45; Headphones; Mic; Line in; Line out; PS/2RJ45; Headset; Line-Out; Line-In;
Optional portsSerial; Parallel; VGA; eSATADP1.2/HDMI2.0/VGA/USB-C(DP); Serial; SD card reader;
SATA ports53
PCI slotsPCIe 3.0 x16; (2x) PCIe 3.0 x1; PCIe 3.0 x16 (wired x4)PCIe 3.0 x16; PCIe x4 (open ended);
M.2 slotsM.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT);
Drive bays(2x) 3.5in; 5.25 inch(2x)2.5in/3.5in; 5.25in (slim);
PSU210/280 W180 W
Weight8.00 kg (17.64 lb)4.54 kg (10.01 lb)
Released20182018
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Fujitsu Esprimo D958 and HP ProDesk 600 G5 SFF

Both computers, the HP ProDesk 600 G5 SFF and the Fujitsu Esprimo D958, were released during the same year - 2018.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

The two models have the same generation of Intel processors. We think that the 9 generation of Intel Processors have enough power to execute all of the home and office tasks that most people will care to do.

Memory

Both models have have equal amount of ram slots (4 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

None of the desktops has an advantage when it comes to the speed of the RAM being used. Both models support RAM speeds of up to 2666. Additionally, if you will be needing a lot of RAM, better go for the HP ProDesk 600 G5 SFF as it has the ability to run 128 GB of RAM. The Fujitsu Esprimo D958 can do a bit less at max 64 GB. Most of the times, this should be sufficient for the majority of users.

Ports

Both models have the same amount of USB ports for total count of 11. If this is not enough, using a USB hub is always a viable option. It's great that both of the models have USB 3.1 ports which will allow you to exchange data with your peripherals at up to 10Gb/s. But if you need maximum connectivity, go with the HP ProDesk 600 G5 SFF as it has 5 USB3.1 ports (the Fujitsu Esprimo D958 has 3).

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Fujitsu Esprimo D958 is better equipped as it comes with 5 SATA slot(s), while the HP ProDesk 600 G5 SFF has 3 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 600 G5 SFF comes with a decent 180 Watt PSU, but the Fujitsu Esprimo D958 has a more powerful one rated at 280 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Fujitsu_Esprimo_D958_motherboard.jpg motherboard layoutHP_ProDesk_600_G5_SFF_motherboard.jpg motherboard layout