Fujitsu Esprimo G5011 vs. HP ProDesk 600 G5 Mini

Comparison and Differences

Fujitsu_Esprimo_G5011.jpg case front and back pannelHP_ProDesk_600_G5_Mini.jpg case front and back pannel
Model
Form factorMicroMicro
CPU optionsIntel Gen10&11 i3/i5/i7Intel Gen8&9 i3/i5/i7; Celeron; Pentium;
ChipsetH510Q370
Dedicated GPU *N.A.N.A.
RAMSODIMM DDR4-3200SODIMM DDR4-2666
RAM slots22
RAM speed3200 MT/s2666 MT/s
RAM max64 GB64 GB
USB ports(2x) USB-A 3.0; (3x) USB-A 2.0; (2x) USB-C 3.0 (DP 1.4)USB-C 3.1; (3x)USB-A 3.1; (3x)USB-A 3.0;
Video portsDisplayPort 1.2; HDMI 1.4b; VGA(2x) DisplayPort:
Other portsRJ45; HeadsetRJ45; Headset; Hdph;
Optional portsN.ADP1.2/HDMI2.0/VGA/USB-C(DP)/Serial; WiFi antenna;
SATA ports11
PCI slotsN.A.N.A.
M.2 slotsM.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)(2x) M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT);
Drive bays2.5in2.5in;
PSU65 W65 W
Weight0.80 kg (1.76 lb)1.24 kg (2.74 lb)
Released20212018
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Fujitsu Esprimo G5011 and HP ProDesk 600 G5 Mini

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo G5011 which was released in 2021. The HP ProDesk 600 G5 Mini is older and entered production in 2018.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo G5011 as it is running a newer generation CPU. This is not to say that HP ProDesk 600 G5 Mini is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Fujitsu Esprimo G5011 is using the faster 3200 MT/s RAM. The HP ProDesk 600 G5 Mini is slower by supporting RAM speeds of up to 2666 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 64 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the HP ProDesk 600 G5 Mini has 7 USB ports. The Fujitsu Esprimo G5011 is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the HP ProDesk 600 G5 Mini, is that it has 4 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Fujitsu Esprimo G5011 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the HP ProDesk 600 G5 Mini comes with 2 ports, while the Fujitsu Esprimo G5011 has only 1. If you are planning to use multiple monitors, the HP ProDesk 600 G5 Mini is the better choice.

The Fujitsu Esprimo G5011 comes with an HDMI port, while the HP ProDesk 600 G5 Mini does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 1 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the HP ProDesk 600 G5 Mini has 1 M.2 slots while the Fujitsu Esprimo G5011 comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Looking at the Power Supply Unit (PSU) of the two models we don't see any differences. For either of them you get a maximum power of 65 Watts. However be careful, many models have more than one power supply option. When buying your computer, it is a good idea to get a version with the most powerful PSU. This will potentially allow you to upgrade to a more powerful GPU for example.

Motherboard

Fujitsu_Esprimo_G5011_motherboard.jpg motherboard layoutHP_ProDesk_600_G5_Mini_motherboard.jpg motherboard layout