HP EliteDesk 800 G4 SFF vs. HP ProDesk 600 G3 Microtower

Comparison and Differences

HP_EliteDesk_800_G4_SFF.jpg case front and back pannelHP_ProDesk_600_G3_Microtower.jpg case front and back pannel
Model
Form factorSmallMini Tower
CPU optionsIntel Gen8 i3/i5/i7; Celeron; Pentium;Intel Gen6&7 i3/i5/i7; Celeron; Pentium;
ChipsetQ370Q270
Dedicated GPU *GeForce GTX 1650 Low ProfileGeForce GTX 1650
RAMDIMM DDR4-2666DIMM DDR4-2400
RAM slots44
RAM speed2666 MT/s2400 MT/s
RAM max64 GB64 GB
USB portsUSB-C 3.1; (4x)USB-A 3.1; (2x)USB-A 3.0; (4x)USB-A 2.0; USB-C 3.0; (6x)USB-A 3.0; (4x)USB-A 2.0;
Video ports(2x) DisplayPort;(2x) DisplayPort:
Other portsRJ45; Hdph; Headset; Line-Out; Line-In;RJ45; Headset; Line-Out; Line-In;
Optional portsDP/HDMI/VGA/USB-C(DP); Serial; SD card reader;DP/HDMI/VGA/USB-C(DP); Serial; SD card reader;
SATA ports35
PCI slotsPCIe 3.0 x16; (2x) PCIe 3.0 x1; PCIe 3.0 x16 (wired x4);PCIe 3.0 x16; (2x) PCIe 3.0 x1; PCIe 3.0 x16 (wired x4);
M.2 slots(2x) M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT);M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT);
Drive bays2.5in; (2x) 3.5in; 5.25in (slim);2.5in; (2x) 3.5in; 5.25in; 5.25in (slim);
PSU250 W180/250 W
Weight6.13 kg (13.51 lb)7.35 kg (16.2 lb)
Released20182017
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between HP EliteDesk 800 G4 SFF and HP ProDesk 600 G3 Microtower

If you are looking for a more modern desktop, then you should go with the HP EliteDesk 800 G4 SFF which was released in 2018. The HP ProDesk 600 G3 Microtower is older and entered production in 2017.

If you are looking for the smaller form factor the HP EliteDesk 800 G4 SFF is the right one for you. It is smaller than the HP ProDesk 600 G3 Microtower and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP EliteDesk 800 G4 SFF as it is running a newer generation CPU. This is not to say that HP ProDesk 600 G3 Microtower is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (4 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The HP EliteDesk 800 G4 SFF is using the faster 2666 MT/s RAM. The HP ProDesk 600 G3 Microtower is slower by supporting RAM speeds of up to 2400 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 64 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

Both models have the same amount of USB ports for total count of 11. If this is not enough, using a USB hub is always a viable option. What is nice about the HP EliteDesk 800 G4 SFF, is that it has 5 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the HP ProDesk 600 G3 Microtower has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the HP ProDesk 600 G3 Microtower is better equipped as it comes with 5 SATA slot(s), while the HP EliteDesk 800 G4 SFF has 3 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the HP EliteDesk 800 G4 SFF has 1 M.2 slots while the HP ProDesk 600 G3 Microtower comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Looking at the Power Supply Unit (PSU) of the two models we don't see any differences. For either of them you get a maximum power of 250 Watts. However be careful, many models have more than one power supply option. When buying your computer, it is a good idea to get a version with the most powerful PSU. This will potentially allow you to upgrade to a more powerful GPU for example.

Motherboard

HP_EliteDesk_800_G4_SFF_motherboard.jpg motherboard layoutHP_ProDesk_600_G3_Microtower_motherboard.jpg motherboard layout