HP ProDesk 400 G6 Mini vs. HP ProDesk 600 G2 SFF

Comparison and Differences

HP_ProDesk_400_G6_Mini.jpg case front and back pannelHP_ProDesk_600_G2_SFF.jpg case front and back pannel
Model
Form factorMicroSmall
CPU optionsIntel Gen10 i3/i5/i7; Celeron; Pentium;Intel Gen6 i3/i5/i7; Celeron; Pentium;
ChipsetQ470Q150
Dedicated GPU *N.A.GeForce GT 1030 Low Profile
RAMSODIMM DDR4-3200DIMM DDR4-2133
RAM slots24
RAM speed3200 MT/s2133 MT/s
RAM max64 GB64 GB
USB portsUSB-C 3.1; USB-A 3.1; (3x) USB-A 3.0; (2x) USB-A 2.0;(6x)USB-A 3.0; (4x)USB-A 2.0;
Video portsDisplayPort; HDMI;(2x) DisplayPort: VGA
Other portsRJ45; Headset;RJ45; Hdph; Mic; Line-Out; Line-In; Serial; (2x) PS2;
Optional portsDP1.4/HDMI2.0/VGA/Serial/USB-C; Serial/(2x)USB-A3.1; WiFi anntena; Media card reader (USB 2.0); Serial;
SATA ports13
PCI slotsN.A.PCIe 3.0 x16; (3x) PCIe x1;
M.2 slotsM.2 2280 M-key (PCIe x4); M.2 2230 (WiFi/BT) N.A.
Drive bays2.5in;2.5in; (2x) 3.5in; 5.25in (slim)
PSU65 W200 W
Weight1.25 kg (2.74 lb)6.9 kg (16.7 lb)
Released20202015
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between HP ProDesk 400 G6 Mini and HP ProDesk 600 G2 SFF

If you are looking for a more modern desktop, then you should go with the HP ProDesk 400 G6 Mini which was released in 2020. The HP ProDesk 600 G2 SFF is older and entered production in 2015.

If you are looking for the smaller form factor the HP ProDesk 400 G6 Mini is the right one for you. It is smaller than the HP ProDesk 600 G2 SFF and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP ProDesk 400 G6 Mini as it is running a newer generation CPU. This is not to say that HP ProDesk 600 G2 SFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The HP ProDesk 600 G2 SFF has 4 RAM slots while the HP ProDesk 400 G6 Mini has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The HP ProDesk 400 G6 Mini is using the faster 3200 MT/s RAM. The HP ProDesk 600 G2 SFF is slower by supporting RAM speeds of up to 2133 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 64 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the HP ProDesk 600 G2 SFF has 10 USB ports. The HP ProDesk 400 G6 Mini is inferior in this regard and packs 7 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the HP ProDesk 400 G6 Mini, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the HP ProDesk 600 G2 SFF has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the HP ProDesk 600 G2 SFF comes with 2 ports, while the HP ProDesk 400 G6 Mini has only 1. If you are planning to use multiple monitors, the HP ProDesk 600 G2 SFF is the better choice.

The HP ProDesk 400 G6 Mini comes with an HDMI port, while the HP ProDesk 600 G2 SFF does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the HP ProDesk 600 G2 SFF is better equipped as it comes with 3 SATA slot(s), while the HP ProDesk 400 G6 Mini has 1 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the HP ProDesk 400 G6 Mini. Sadly, the HP ProDesk 600 G2 SFF has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 400 G6 Mini comes with a decent 65 Watt PSU, but the HP ProDesk 600 G2 SFF has a more powerful one rated at 200 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

HP_ProDesk_400_G6_Mini_motherboard.jpg motherboard layoutHP_ProDesk_600_G2_SFF_motherboard.jpg motherboard layout