Dell OptiPlex 7010 USFF vs. HP ProDesk 400 G5 SFF

Comparison and Differences

Dell_OptiPlex_7010_USFF.jpg case front and back pannelHP_ProDesk_400_G5_SFF.jpg case front and back pannel
Model
Form factorUltra SmallSmall
CPU optionsIntel Gen2&3 i3/i5/i7; Celeron; Pentium;Intel Gen8 i3/i5/i7; Celeron; Pentium;
ChipsetQ77B360
Dedicated GPU *N.A.GeForce GT 1030 Low Profile
RAMDIMM DDR3-1333/1600 DIMM DDR4-2666
RAM slots22
RAM speed1600 MT/s2666 MT/s
RAM max16 GB32 GB
USB ports(2x)USB-A 3.0; (4x)USB-A 2.0; (4x)USB-A 3.0; (4x)USB-A 2.0;
Video ports(2x) DisplayPort 1.1; VGA;DisplayPort; VGA;
Other portsSerial; RJ45; Hdph; Mic; Line-Out; Line-In; RJ45; Headset; Line-In; Line-Out;
Optional portsWiFi antennaSD card reader; Serial; Serial and (2x) PS2; DP/HDMI/VGA/USB-C(DP);
SATA ports23
PCI slotsmPCIe 2.0;PCIe 3.0 x16; PCIe 3.0 x1;
M.2 slotsN.A.M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT)
Drive bays2.5in; 5.25in(slim) (2x)2.5/3.5in; 5.25in (slim)
PSU200 W180 W
Weight3.3 kg (7.26 lb) 4.6 kg (10.14 lb)
Released20122018
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 7010 USFF and HP ProDesk 400 G5 SFF

If you are looking for a more modern desktop, then you should go with the HP ProDesk 400 G5 SFF which was released in 2018. The Dell OptiPlex 7010 USFF is older and entered production in 2012.

If you are looking for the smaller form factor the Dell OptiPlex 7010 USFF is the right one for you. It is smaller than the HP ProDesk 400 G5 SFF and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP ProDesk 400 G5 SFF as it is running a newer generation CPU. This is not to say that Dell OptiPlex 7010 USFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The HP ProDesk 400 G5 SFF is using the faster 2666 MT/s RAM. The Dell OptiPlex 7010 USFF is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the HP ProDesk 400 G5 SFF as it has the ability to run 32 GB of RAM. The Dell OptiPlex 7010 USFF can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the HP ProDesk 400 G5 SFF has 8 USB ports. The Dell OptiPlex 7010 USFF is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Dell OptiPlex 7010 USFF comes with 2 ports, while the HP ProDesk 400 G5 SFF has only 1. If you are planning to use multiple monitors, the Dell OptiPlex 7010 USFF is the better choice.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the HP ProDesk 400 G5 SFF is better equipped as it comes with 3 SATA slot(s), while the Dell OptiPlex 7010 USFF has 2 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the HP ProDesk 400 G5 SFF. Sadly, the Dell OptiPlex 7010 USFF has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 400 G5 SFF comes with a decent 180 Watt PSU, but the Dell OptiPlex 7010 USFF has a more powerful one rated at 200 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_7010_USFF_motherboard.jpg motherboard layoutHP_ProDesk_400_G5_SFF_motherboard.jpg motherboard layout