HP EliteDesk 800 G6 Mini vs. HP ProDesk 400 G2 Microtower
Comparison and Differences
|Model||HP EliteDesk 800 G6 Mini||HP ProDesk 400 G2 Microtower|
|Form factor||Micro||Mini Tower|
|CPU options||Intel Gen10 i3/i5/i7/i9; Celeron; Pentium;||Intel Gen4 i3/i5/i7; Celeron; Pentium;|
|Dedicated GPU *||NVIDIA GTX 1660 Ti (custom)||GeForce GTX 1660 Super|
|RAM||SODIMM DDR4-2933||DIMM DDR3-1600|
|RAM speed||2933 MT/s||1600 MT/s|
|RAM max||64 GB||16 GB|
|USB ports||USB-C 3.1; (3x)USB-A 3.1; (3x)USB-A 3.0;||(2x)USB-A 3.0; (4x)USB-A 2.0;|
|Video ports||(2x) DisplayPort;||VGA; DVI-D;|
|Other ports||RJ45; Hdph; Headset;||RJ45; Hdph; Mic; Line-Out; Line-In; Serial; (2x) PS2; SD card reader (USB-? 2.0);|
|Optional ports||DP1.4/ HDMI2.0a/ VGA/ USB-C(DP1.4)/ (2x)USB-A 3.0/ LAN/ Thunderbolt3; NVIDIA GTX 1660/(2x)USB-A 2.0/ Serial; WiFi antenna;||Serial; Parallel;|
|PCI slots||N.A.||PCIe x16; (3x) PCIe x1;|
|M.2 slots||(2x) M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT);||N.A.|
|Drive bays||2.5in;||(2x) 3.5in; 5.25in (slim)|
|PSU||65/90/150 W||180/300 W|
|Weight||1.42 kg (3.13 lb)||6.5 kg (14.33 lb)|
|Price**||Check Price||Check Price|
Differences between HP EliteDesk 800 G6 Mini and HP ProDesk 400 G2 Microtower
If you are looking for a more modern desktop, then you should go with the HP EliteDesk 800 G6 Mini which was released in 2020. The HP ProDesk 400 G2 Microtower is older and entered production in 2014.
If you are looking for the smaller form factor the HP EliteDesk 800 G6 Mini is the right one for you. It is smaller than the HP ProDesk 400 G2 Microtower and will fit more easily under your desk.
Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP EliteDesk 800 G6 Mini as it is running a newer generation CPU. This is not to say that HP ProDesk 400 G2 Microtower is bad - it can still run some powerful CPUs, albeit being an older generation.
RAM slots is where your insert your RAM sticks. Each of those two models has 2 RAM slot(s) which should be taken into account when planning how much and what combination of RAM you are going to need.The HP EliteDesk 800 G6 Mini is using the faster 2933 MT/s RAM. The HP ProDesk 400 G2 Microtower is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the HP EliteDesk 800 G6 Mini as it has the ability to run 64 GB of RAM. The HP ProDesk 400 G2 Microtower can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.
In total the HP EliteDesk 800 G6 Mini has 7 USB ports. The HP ProDesk 400 G2 Microtower is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the HP EliteDesk 800 G6 Mini, is that it has 3 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the HP ProDesk 400 G2 Microtower has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.
Unfortunately, only the HP EliteDesk 800 G6 Mini has a DisplayPort. The HP ProDesk 400 G2 Microtower does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.
None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.
SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the HP ProDesk 400 G2 Microtower is better equipped as it comes with 3 SATA slot(s), while the HP EliteDesk 800 G6 Mini has 1 slot(s).
If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the HP EliteDesk 800 G6 Mini. Sadly, the HP ProDesk 400 G2 Microtower has no such slot, and you will be forced to use the SATA interface instead.Remark: Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!
Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP EliteDesk 800 G6 Mini comes with a decent 150 Watt PSU, but the HP ProDesk 400 G2 Microtower has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.