Dell OptiPlex 3000 SFF vs. HP ProDesk 400 G1 SFF

Comparison and Differences

Dell_OptiPlex_3000_SFF.jpg case front and back pannelHP_ProDesk_400_G1_SFF.jpg case front and back pannel
Model
Form factorSmallSmall
CPU optionsIntel Gen 12 i3/i5/i7/i9; PentiumIntel Gen4 i3/i5/i7; Celeron; Pentium;
ChipsetB660H81
Dedicated GPU *AMD Radeon RX 6400 Low ProfileGeForce GTX 1650 Low Profile
RAMDIMM DDR4-3200DIMM DDR3-1600
RAM slots22
RAM speed3200 MT/s1600 MT/s
RAM max64 GB16 GB
USB ports(4x) USB-A 2.0; (4x) USB-A 3.0;(2x)USB-A 3.0; (6x)USB-A 2.0;
Video portsDisplay Port 1.4a; HDMI 1.4b;DVI-D; VGA;
Other portsRJ45; Audio; Line-Out/In;RJ45; Hdph; Mic; Line-Out; Line-In; Serial; (2x) PS2;
Optional portsHDMI 2.0b/Displayport/VGA;Media card reader; Serial; Parallel;
SATA ports23
PCI slotsPCIe 3.0 x16; PCIe 3.0 x1;PCIe x16; (3x) PCIe x1;
M.2 slotsM.2 2230/2280 (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT) N.A.
Drive bays3.5in; 2.5in;2.5in; (2x) 3.5in; 5.25in (slim)
PSU180/300 W240 W
Weight5.03 kg (11.09 lb)5.9 kg (13.0 lb)
Released20222013
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 3000 SFF and HP ProDesk 400 G1 SFF

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 3000 SFF which was released in 2022. The HP ProDesk 400 G1 SFF is older and entered production in 2013.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 3000 SFF as it is running a newer generation CPU. This is not to say that HP ProDesk 400 G1 SFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Dell OptiPlex 3000 SFF is using the faster 3200 MT/s RAM. The HP ProDesk 400 G1 SFF is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 3000 SFF as it has the ability to run 64 GB of RAM. The HP ProDesk 400 G1 SFF can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

Both models have the same amount of USB ports for total count of 8. If this is not enough, using a USB hub is always a viable option. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

Unfortunately, only the Dell OptiPlex 3000 SFF has a DisplayPort. The HP ProDesk 400 G1 SFF does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

The Dell OptiPlex 3000 SFF comes with an HDMI port, while the HP ProDesk 400 G1 SFF does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the HP ProDesk 400 G1 SFF is better equipped as it comes with 3 SATA slot(s), while the Dell OptiPlex 3000 SFF has 2 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Dell OptiPlex 3000 SFF. Sadly, the HP ProDesk 400 G1 SFF has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 400 G1 SFF comes with a decent 240 Watt PSU, but the Dell OptiPlex 3000 SFF has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_3000_SFF_motherboard.jpg motherboard layoutHP_ProDesk_400_G1_SFF_motherboard.jpg motherboard layout