Alienware Aurora R9 vs. HP ProDesk 400 G1 SFF

Comparison and Differences

Alienware_Aurora_R9.jpg case front and back pannelHP_ProDesk_400_G1_SFF.jpg case front and back pannel
Model
Form factorMid TowerSmall
CPU optionsIntel Gen9 i3/i5/i7/i9;Intel Gen4 i3/i5/i7; Celeron; Pentium;
ChipsetZ370H81
Dedicated GPU *GeForce RTX 2080 TiGeForce GTX 1650 Low Profile
RAMDIMM DDR4-2666/3000DIMM DDR3-1600
RAM slots42
RAM speed3000 MT/s1600 MT/s
RAM max64 GB16 GB
USB ports(6x) USB 3.0 Type A; (5x) USB-A 2.0; USB 3.1 Type C; USB 3.1 Type A; USB 3.0 Type C;(2x)USB-A 3.0; (6x)USB-A 2.0;
Video portsDisplayPort 1.4;DVI-D; VGA;
Other portsRJ45; Headset; Line-Out; Line-In; S/PDFI optical/analog; Front, side, center, rare outputs;RJ45; Hdph; Mic; Line-Out; Line-In; Serial; (2x) PS2;
Optional portsN.A.Media card reader; Serial; Parallel;
SATA ports43
PCI slots(x2) PCIe 3.0 x16; (x2) PCIe 3.0 x4;PCIe x16; (3x) PCIe x1;
M.2 slotsM.2 2230 (WiFi/BT); M.2 2242/2260/2280 (PCIe 3.0 x4, NVMe);N.A.
Drive bays(2x) 2.5in; 3.25in; 9.5mm; U.22.5in; (2x) 3.5in; 5.25in (slim)
PSU460/850 W240 W
Weight14.82 kg (32.67 lb)5.9 kg (13.0 lb)
Released20182013
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Alienware Aurora R9 and HP ProDesk 400 G1 SFF

If you are looking for a more modern desktop, then you should go with the Alienware Aurora R9 which was released in 2018. The HP ProDesk 400 G1 SFF is older and entered production in 2013.

If you are looking for the smaller form factor the HP ProDesk 400 G1 SFF is the right one for you. It is smaller than the Alienware Aurora R9 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Alienware Aurora R9 as it is running a newer generation CPU. This is not to say that HP ProDesk 400 G1 SFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Alienware Aurora R9 has 4 RAM slots while the HP ProDesk 400 G1 SFF has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Alienware Aurora R9 is using the faster 3000 MT/s RAM. The HP ProDesk 400 G1 SFF is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Alienware Aurora R9 as it has the ability to run 64 GB of RAM. The HP ProDesk 400 G1 SFF can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Alienware Aurora R9 has 14 USB ports. The HP ProDesk 400 G1 SFF is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Alienware Aurora R9, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the HP ProDesk 400 G1 SFF has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

Unfortunately, only the Alienware Aurora R9 has a DisplayPort. The HP ProDesk 400 G1 SFF does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Alienware Aurora R9 is better equipped as it comes with 4 SATA slot(s), while the HP ProDesk 400 G1 SFF has 3 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Alienware Aurora R9. Sadly, the HP ProDesk 400 G1 SFF has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 400 G1 SFF comes with a decent 240 Watt PSU, but the Alienware Aurora R9 has a more powerful one rated at 850 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Alienware_Aurora_R9_motherboard.jpg motherboard layoutHP_ProDesk_400_G1_SFF_motherboard.jpg motherboard layout