HP ProDesk 400 G1 Mini vs. HP ProDesk 400 G2 Mini

Comparison and Differences

HP_ProDesk_400_G1_Mini.jpg case front and back pannelHP_ProDesk_400_G2_Mini.jpg case front and back pannel
Model
Form factorMicroMicro
CPU optionsIntel Gen4 i3/i5/i7; Celeron; Pentium;Intel Gen6 i3/i5/i7; Celeron; Pentium;
ChipsetH81H110
Dedicated GPU *N.A.N.A.
RAMSODIMM DDR3-1600 SODIMM DDR4-2133
RAM slots22
RAM speed1600 MT/s2133 MT/s
RAM max16 GB32 GB
USB ports(2x)USB-A 3.0; (4x)USB-A 2.0; (4x)USB-A 3.0; (2x)USB-A 2.0;
Video portsDisplayPort v1.2; VGA;DisplayPort; VGA;
Other portsRJ45; Hdph; Mic;RJ45; Hdph; Mic; Serial;
Optional portsN.A.WiFi antenna;
SATA ports11
PCI slotsN.A.N.A.
M.2 slotsM.2 2280 M-key (PCIe); M.2 2230 (WiFi/BT)M.2 2280 M-key (PCIe); M.2 2230 (WiFi/BT)
Drive bays2.5in;2.5in;
PSU65 W65/90 W
Weight1.3 kg (2.9 lb)1.3 kg (2.9 lb)
Released20142016
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between HP ProDesk 400 G1 Mini and HP ProDesk 400 G2 Mini

If you are looking for a more modern desktop, then you should go with the HP ProDesk 400 G2 Mini which was released in 2016. The HP ProDesk 400 G1 Mini is older and entered production in 2014.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP ProDesk 400 G2 Mini as it is running a newer generation CPU. This is not to say that HP ProDesk 400 G1 Mini is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The HP ProDesk 400 G2 Mini is using the faster 2133 MT/s RAM. The HP ProDesk 400 G1 Mini is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the HP ProDesk 400 G2 Mini as it has the ability to run 32 GB of RAM. The HP ProDesk 400 G1 Mini can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

Both models have the same amount of USB ports for total count of 6. If this is not enough, using a USB hub is always a viable option. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 1 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 400 G1 Mini comes with a decent 65 Watt PSU, but the HP ProDesk 400 G2 Mini has a more powerful one rated at 90 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

HP_ProDesk_400_G1_Mini_motherboard.jpg motherboard layoutHP_ProDesk_400_G2_Mini_motherboard.jpg motherboard layout