Fujitsu Esprimo P9010 vs. HP ProDesk 400 G1 Mini

Comparison and Differences

Fujitsu_Esprimo_P9010.jpg case front and back pannelHP_ProDesk_400_G1_Mini.jpg case front and back pannel
Model
Form factorMini TowerMicro
CPU optionsIntel Gen10 i3/i5/i7/i9Intel Gen4 i3/i5/i7; Celeron; Pentium;
ChipsetQ470H81
Dedicated GPU *GeForce GTX 1650 SuperN.A.
RAMUDIMM DDR4-2933SODIMM DDR3-1600
RAM slots42
RAM speed2933 MT/s1600 MT/s
RAM max128 GB16 GB
USB ports(2x) USB-A 3.0; (4x) USB-A 2.0; (4x) USB-A 3.1; USB-C 3.1(2x)USB-A 3.0; (4x)USB-A 2.0;
Video ports(2x) DisplayPort 1.2DisplayPort v1.2; VGA;
Other portsRJ45; Headset, Line in; Line outRJ45; Hdph; Mic;
Optional portsSerial; Parallel; PS/2; VGA; DVI; USB-C 3.1 (DP support 60W/15W)N.A.
SATA ports41
PCI slotsPCIe 3.0 x16; PCIe 3.0 x1; PCIe 3.0 x16 (wired x4)N.A.
M.2 slots(2x) M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)M.2 2280 M-key (PCIe); M.2 2230 (WiFi/BT)
Drive bays(3x) 3.5in; 2.5in; (2x) 5.25 inch2.5in;
PSU280/300 W65 W
Weight10.00 kg (24.00 lb)1.3 kg (2.9 lb)
Released20202014
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Fujitsu Esprimo P9010 and HP ProDesk 400 G1 Mini

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo P9010 which was released in 2020. The HP ProDesk 400 G1 Mini is older and entered production in 2014.

If you are looking for the smaller form factor the HP ProDesk 400 G1 Mini is the right one for you. It is smaller than the Fujitsu Esprimo P9010 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo P9010 as it is running a newer generation CPU. This is not to say that HP ProDesk 400 G1 Mini is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Fujitsu Esprimo P9010 has 4 RAM slots while the HP ProDesk 400 G1 Mini has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Fujitsu Esprimo P9010 is using the faster 2933 MT/s RAM. The HP ProDesk 400 G1 Mini is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Fujitsu Esprimo P9010 as it has the ability to run 128 GB of RAM. The HP ProDesk 400 G1 Mini can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Fujitsu Esprimo P9010 has 11 USB ports. The HP ProDesk 400 G1 Mini is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Fujitsu Esprimo P9010, is that it has 5 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the HP ProDesk 400 G1 Mini has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Fujitsu Esprimo P9010 comes with 2 ports, while the HP ProDesk 400 G1 Mini has only 1. If you are planning to use multiple monitors, the Fujitsu Esprimo P9010 is the better choice.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Fujitsu Esprimo P9010 is better equipped as it comes with 4 SATA slot(s), while the HP ProDesk 400 G1 Mini has 1 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Fujitsu Esprimo P9010 has 1 M.2 slots while the HP ProDesk 400 G1 Mini comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 400 G1 Mini comes with a decent 65 Watt PSU, but the Fujitsu Esprimo P9010 has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Fujitsu_Esprimo_P9010_motherboard.jpg motherboard layoutHP_ProDesk_400_G1_Mini_motherboard.jpg motherboard layout