Dell OptiPlex 7080M vs. HP EliteDesk 800 G3 Tower

Comparison and Differences

Dell_OptiPlex_7080M.jpg case front and back pannelHP_EliteDesk_800_G3_Tower.jpg case front and back pannel
Model
Form factorMicroMini Tower
CPU optionsIntel Gen10 i3/i5/i7/i9;Intel Gen6&7 i3/i5/i7; Celeron; Pentium;
ChipsetQ470Q270
Dedicated GPU *N.A.GeForce GTX 1660 Super
RAMSODIMM DDR4-2666/2933DIMM DDR4-2400
RAM slots24
RAM speed2933 MT/s2400 MT/s
RAM max64 GB64 GB
USB portsUSB 3.1 Type C; (3x) USB-A 3.1; (2x) USB-A 3.0;USB-C 3.0; (6x)USB-A 3.0; (4x)USB-A 2.0;
Video ports(2x) Display Port 1.4;(2x) DisplayPort;
Other portsRJ45; Headset; Line-Out/In;RJ45; Hdph; Headset; Line-Out; Line-In;
Optional portsHDMI2.0b/DP1.4/VGA/USB Type-C (DP Alt Mode); Serial; Serial+PS2; (2x) WiFi antenna;DP/HDMI/VGA/USB-C(DP); Serial; SD card reader;
SATA ports15
PCI slotsPCIe x8 Gen3 (optional) PCIe 3.0 x16; (2x) PCIe 3.0 x1; PCIe 3.0 x16 (wired x4);
M.2 slotsM.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2280 M-key (PCIe); M.2 2230 (WiFi/BT) M.2 2280 M-key (PCIe x4); M.2 2230 (WiFi/BT);
Drive bays2.5in2.5in; (2x) 3.5in; 5.25in; 5.25in (slim);
PSU90/130/180 W250/500 W
Weight1.38 kg (3.04 lb)9.8 kg (21.7 lb)
Released20202017
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 7080M and HP EliteDesk 800 G3 Tower

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 7080M which was released in 2020. The HP EliteDesk 800 G3 Tower is older and entered production in 2017.

If you are looking for the smaller form factor the Dell OptiPlex 7080M is the right one for you. It is smaller than the HP EliteDesk 800 G3 Tower and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 7080M as it is running a newer generation CPU. This is not to say that HP EliteDesk 800 G3 Tower is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The HP EliteDesk 800 G3 Tower has 4 RAM slots while the Dell OptiPlex 7080M has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Dell OptiPlex 7080M is using the faster 2933 MT/s RAM. The HP EliteDesk 800 G3 Tower is slower by supporting RAM speeds of up to 2400 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 64 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the HP EliteDesk 800 G3 Tower has 10 USB ports. The Dell OptiPlex 7080M is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Dell OptiPlex 7080M, is that it has 4 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the HP EliteDesk 800 G3 Tower has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the HP EliteDesk 800 G3 Tower is better equipped as it comes with 5 SATA slot(s), while the Dell OptiPlex 7080M has 1 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Dell OptiPlex 7080M has 1 M.2 slots while the HP EliteDesk 800 G3 Tower comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 7080M comes with a decent 180 Watt PSU, but the HP EliteDesk 800 G3 Tower has a more powerful one rated at 500 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_7080M_motherboard.jpg motherboard layoutHP_EliteDesk_800_G3_Tower_motherboard.jpg motherboard layout