Dell OptiPlex 7000 M vs. HP EliteDesk 800 G3 SFF

Comparison and Differences

Dell_OptiPlex_7000_M.jpg case front and back pannelHP_EliteDesk_800_G3_SFF.jpg case front and back pannel
Model
Form factorMicroSmall
CPU optionsIntel Gen 12 i3/i5/i7/i9;Intel Gen6&7 i3/i5/i7; Celeron; Pentium;
ChipsetQ670Q270
Dedicated GPU *N.A.GeForce GT 1030 Low Profile
RAMSODIMM DDR5-4800DIMM DDR4-2400
RAM slots24
RAM speed4800 MT/s2400 MT/s
RAM max64 GB64 GB
USB ports(3x) USB-A 3.0; (3x) USB-A 3.1; USB-C 3.2;USB-C 3.0; (6x)USB-A 3.0; (4x)USB-A 2.0;
Video ports(2x) Display Port 1.4a;(2x) DisplayPort;
Other portsRJ45; Audio; Line-Out/In;RJ45; Hdph; Headset; Line-Out; Line-In;
Optional portsHDMI 2.0b/Displayport/VGA/PS2/serial/USB Type-C;DP/HDMI/VGA/USB-C(DP); Serial; SD card reader;
SATA ports03
PCI slotsN.A.PCIe 3.0 x16; (2x) PCIe 3.0 x1; PCIe 3.0 x16 (wired x4);
M.2 slots(2x)M.2 2230/2280 (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT) M.2 2280 M-key (PCIe x4); M.2 2230 (WiFi/BT);
Drive baysN/A2.5in; (2x) 3.5in; 5.25in (slim);
PSU90/130/180 W180 W
Weight1.25 kg (2.75 lb)5.3 kg (11.7 lb)
Released20222017
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 7000 M and HP EliteDesk 800 G3 SFF

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 7000 M which was released in 2022. The HP EliteDesk 800 G3 SFF is older and entered production in 2017.

If you are looking for the smaller form factor the Dell OptiPlex 7000 M is the right one for you. It is smaller than the HP EliteDesk 800 G3 SFF and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 7000 M as it is running a newer generation CPU. This is not to say that HP EliteDesk 800 G3 SFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The HP EliteDesk 800 G3 SFF has 4 RAM slots while the Dell OptiPlex 7000 M has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Dell OptiPlex 7000 M is using the faster 4800 MT/s RAM. The HP EliteDesk 800 G3 SFF is slower by supporting RAM speeds of up to 2400 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 64 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the HP EliteDesk 800 G3 SFF has 10 USB ports. The Dell OptiPlex 7000 M is inferior in this regard and packs 9 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Dell OptiPlex 7000 M, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the HP EliteDesk 800 G3 SFF has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the HP EliteDesk 800 G3 SFF is better equipped as it comes with 3 SATA slot(s), while the Dell OptiPlex 7000 M has 0 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Dell OptiPlex 7000 M has 1 M.2 slots while the HP EliteDesk 800 G3 SFF comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Looking at the Power Supply Unit (PSU) of the two models we don't see any differences. For either of them you get a maximum power of 180 Watts. However be careful, many models have more than one power supply option. When buying your computer, it is a good idea to get a version with the most powerful PSU. This will potentially allow you to upgrade to a more powerful GPU for example.

Motherboard

Dell_OptiPlex_7000_M_motherboard.jpg motherboard layoutHP_EliteDesk_800_G3_SFF_motherboard.jpg motherboard layout