Dell OptiPlex 7000 SFF vs. Fujitsu Esprimo Q7010

Comparison and Differences

Dell_OptiPlex_7000_SFF.jpg case front and back pannelFujitsu_Esprimo_Q7010.jpg case front and back pannel
Model
Form factorSmallMicro
CPU optionsIntel Gen 12 i3/i5/i7/i9;Intel Gen10 i3/i5
ChipsetQ670H470
Dedicated GPU *AMD Radeon RX6400 Low ProfileN.A.
RAMDIMM DDR4-3200SODIMM DDR4-2933
RAM slots42
RAM speed3200 MT/s2933 MT/s
RAM max128 GB64 GB
USB ports(4x) USB-A 2.0; (3x) USB-A 3.0; (2x) USB-A 3.1; USB-C 3.2;(4x) USB-A 3.0; (4x) USB-A 2.0; (2x) USB-A 3.1; USB-C 3.1
Video ports(3x) Display Port 1.4a;(2x) DisplayPort 1.2
Other portsRJ45; Audio; Line-Out/In;RJ45; Headset, Line out
Optional portsHDMI 2.0b/Displayport/VGA/PS2/serial/USB Type-C; Serial port; SD-card slotSerial; VGA
SATA ports33
PCI slotsPCIe 4.0 x16; PCIe 3.0 x4;N.A.
M.2 slotsM.2 2230/2280 (PCIe 4.0 x4, NVMe); M.2 2280; M.2 2230; M.2 2230 (WiFi/BT) M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays3.5in; (2x) 2.5in;2.5in; 5.25 inch slim
PSU240/260/300 W65 W
Weight5.30 kg (11.69 lb)1.60 kg (3.53 lb)
Released20222020
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 7000 SFF and Fujitsu Esprimo Q7010

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 7000 SFF which was released in 2022. The Fujitsu Esprimo Q7010 is older and entered production in 2020.

If you are looking for the smaller form factor the Fujitsu Esprimo Q7010 is the right one for you. It is smaller than the Dell OptiPlex 7000 SFF and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 7000 SFF as it is running a newer generation CPU. This is not to say that Fujitsu Esprimo Q7010 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Dell OptiPlex 7000 SFF has 4 RAM slots while the Fujitsu Esprimo Q7010 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Dell OptiPlex 7000 SFF is using the faster 3200 MT/s RAM. The Fujitsu Esprimo Q7010 is slower by supporting RAM speeds of up to 2933 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 7000 SFF as it has the ability to run 128 GB of RAM. The Fujitsu Esprimo Q7010 can do a bit less at max 64 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Fujitsu Esprimo Q7010 has 11 USB ports. The Dell OptiPlex 7000 SFF is inferior in this regard and packs 10 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. It's great that both of the models have USB 3.1 ports which will allow you to exchange data with your peripherals at up to 10Gb/s. But if you need maximum connectivity, go with the Fujitsu Esprimo Q7010 as it has 3 USB3.1 ports (the Dell OptiPlex 7000 SFF has 2).

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Dell OptiPlex 7000 SFF comes with 3 ports, while the Fujitsu Esprimo Q7010 has only 2. If you are planning to use multiple monitors, the Dell OptiPlex 7000 SFF is the better choice.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 3 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Dell OptiPlex 7000 SFF has 1 M.2 slots while the Fujitsu Esprimo Q7010 comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo Q7010 comes with a decent 65 Watt PSU, but the Dell OptiPlex 7000 SFF has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_7000_SFF_motherboard.jpg motherboard layoutFujitsu_Esprimo_Q7010_motherboard.jpg motherboard layout