Fujitsu Esprimo P520 vs. HP ProDesk 400 G1 Mini

Comparison and Differences

Fujitsu_Esprimo_P520.jpg case front and back pannelHP_ProDesk_400_G1_Mini.jpg case front and back pannel
Model
Form factorMini TowerMicro
CPU optionsIntel Gen4 i3/i5/i7; Pentium; CeleronIntel Gen4 i3/i5/i7; Celeron; Pentium;
ChipsetB85H81
Dedicated GPU *GeForce GTX 1650 SuperN.A.
RAMUDIMM DDR3-1600SODIMM DDR3-1600
RAM slots42
RAM speed1600 MT/s1600 MT/s
RAM max32 GB16 GB
USB ports(2x) USB-A 3.0; (6x) USB-A 2.0(2x)USB-A 3.0; (4x)USB-A 2.0;
Video portsDVI; VGADisplayPort v1.2; VGA;
Other portsRJ45; Headphones; (2x) Mic; Line in; Line out; PS/2; SerialRJ45; Hdph; Mic;
Optional portsParallel; eSATA; DisplayPortN.A.
SATA ports41
PCI slotsPCIe 3.0 x16; (2x) PCIe 2.0 x1; PCIe 2.0 x16 (wired x4)N.A.
M.2 slotsN.A.M.2 2280 M-key (PCIe); M.2 2230 (WiFi/BT)
Drive bays(3x) 3.5in; (2x) 5.25 inch2.5in;
PSU280 W65 W
Weight10.00 kg (24.00 lb)1.3 kg (2.9 lb)
Released20142014
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Fujitsu Esprimo P520 and HP ProDesk 400 G1 Mini

Both computers, the HP ProDesk 400 G1 Mini and the Fujitsu Esprimo P520, were released during the same year - 2014.

If you are looking for the smaller form factor the HP ProDesk 400 G1 Mini is the right one for you. It is smaller than the Fujitsu Esprimo P520 and will fit more easily under your desk.

Processor

The two models have the same generation of Intel processors. We think that the 4 generation of Intel Processors have enough power to execute all of the home and office tasks that most people will care to do.

Memory

The Fujitsu Esprimo P520 has 4 RAM slots while the HP ProDesk 400 G1 Mini has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

None of the desktops has an advantage when it comes to the speed of the RAM being used. Both models support RAM speeds of up to 1600. Additionally, if you will be needing a lot of RAM, better go for the Fujitsu Esprimo P520 as it has the ability to run 32 GB of RAM. The HP ProDesk 400 G1 Mini can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Fujitsu Esprimo P520 has 8 USB ports. The HP ProDesk 400 G1 Mini is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Fujitsu Esprimo P520 is better equipped as it comes with 4 SATA slot(s), while the HP ProDesk 400 G1 Mini has 1 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the HP ProDesk 400 G1 Mini. Sadly, the Fujitsu Esprimo P520 has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 400 G1 Mini comes with a decent 65 Watt PSU, but the Fujitsu Esprimo P520 has a more powerful one rated at 280 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Fujitsu_Esprimo_P520_motherboard.jpg motherboard layoutHP_ProDesk_400_G1_Mini_motherboard.jpg motherboard layout