Fujitsu Esprimo D958 vs. Fujitsu Esprimo E410

Comparison and Differences

Fujitsu_Esprimo_D958.jpg case front and back pannelFujitsu_Esprimo_E410.jpg case front and back pannel
Model
Form factorSmallSmall
CPU optionsIntel Gen8&9 i3/i5/i7Intel Gen2&3 i3/i5/i7; Pentium; Celeron
ChipsetQ370H61
Dedicated GPU *Radeon RX 6400 Low ProfileRadeon RX 6400 Low Profile
RAMUDIMM DDR4-2666UDIMM DDR3-1600
RAM slots42
RAM speed2666 MT/s1600 MT/s
RAM max64 GB32 GB
USB ports(4x) USB-A 3.0; (4x) USB-A 2.0; (2x) USB-C 3.1; USB-C 3.1(6x) USB-A 2.0
Video ports(2x) DisplayPort 1.2; DVIVGA; DVI
Other portsRJ45; Headphones; Mic; Line in; Line out; PS/2RJ45; Headphones; (2x) Mic; Line in; Line out; (1x) PS/2;
Optional portsSerial; Parallel; VGA; eSATAUSB-A 3.0
SATA ports53
PCI slotsPCIe 3.0 x16; (2x) PCIe 3.0 x1; PCIe 3.0 x16 (wired x4)PCIe 2.0 x16; PCIe 2.0 x1
M.2 slotsM.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)N.A.
Drive bays(2x) 3.5in; 5.25 inch(2x) 3.5in; 5.25 inch
PSU210/280 W280 W
Weight8.00 kg (17.64 lb)8.00 kg (17.64 lb)
Released20182014
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Fujitsu Esprimo D958 and Fujitsu Esprimo E410

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo D958 which was released in 2018. The Fujitsu Esprimo E410 is older and entered production in 2014.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo D958 as it is running a newer generation CPU. This is not to say that Fujitsu Esprimo E410 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Fujitsu Esprimo D958 has 4 RAM slots while the Fujitsu Esprimo E410 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Fujitsu Esprimo D958 is using the faster 2666 MT/s RAM. The Fujitsu Esprimo E410 is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Fujitsu Esprimo D958 as it has the ability to run 64 GB of RAM. The Fujitsu Esprimo E410 can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Fujitsu Esprimo D958 has 11 USB ports. The Fujitsu Esprimo E410 is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Fujitsu Esprimo D958, is that it has 3 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Fujitsu Esprimo E410 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

Unfortunately, only the Fujitsu Esprimo D958 has a DisplayPort. The Fujitsu Esprimo E410 does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Fujitsu Esprimo D958 is better equipped as it comes with 5 SATA slot(s), while the Fujitsu Esprimo E410 has 3 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Fujitsu Esprimo D958. Sadly, the Fujitsu Esprimo E410 has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Looking at the Power Supply Unit (PSU) of the two models we don't see any differences. For either of them you get a maximum power of 280 Watts. However be careful, many models have more than one power supply option. When buying your computer, it is a good idea to get a version with the most powerful PSU. This will potentially allow you to upgrade to a more powerful GPU for example.

Motherboard

Fujitsu_Esprimo_D958_motherboard.jpg motherboard layoutFujitsu_Esprimo_E410_motherboard.jpg motherboard layout