Fujitsu Esprimo D7010 vs. Fujitsu Esprimo D9011

Comparison and Differences

Fujitsu_Esprimo_D7010.jpg case front and back pannelFujitsu_Esprimo_D9011.jpg case front and back pannel
Model
Form factorSmallSmall
CPU optionsIntel Gen10 i3/i5/i7/i9; Pentium; CeleronIntel Gen10&11 i3/i5/i7/i9
ChipsetB460Q570
Dedicated GPU *Radeon RX 6400 Low ProfileRadeon RX 6400 Low Profile
RAMUDIMM DDR4-2933UDIMM DDR4-3200
RAM slots44
RAM speed2933 MT/s3200 MT/s
RAM max128 GB128 GB
USB ports(6x) USB-A 3.0; (4x) USB-A 2.0; USB-A 3.1; USB-C 3.1(3x) USB-A 3.0; (4x) USB-A 2.0; (4x) USB-A 3.1; USB-C 3.2
Video ports(2x) DisplayPort 1.2(2x) DisplayPort 1.4
Other portsRJ45; Headset, Line in; Line outRJ45; Headset, Line in; Line out
Optional portsSerial; Parallel; PS/2; VGA; DVI; USB-C 3.1 (DP support 60W/15W)Serial; PS/2; VGA; DVI; USB-C 3.1 (DP support 60W/15W)
SATA ports45
PCI slotsPCIe 3.0 x16; PCIe 3.0 x16 (wired x4)PCIe 4.0 x16; PCIe 3.0 x16 (wired x4)
M.2 slotsM.2 2280/2230 M-key (PCIe 3.0 x4, NVMe)(2x) M.2 2280/2230 M-key (PCIe 4.0/3.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays(3x) 3.5in; 2.5in; (2x) 5.25 inch3.5in; 2.5in; (2x) 5.25 inch slim
PSU280/300 W280/300 W
Weight8.00 kg (17.64 lb)8.00 kg (17.64 lb)
Released20202021
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Fujitsu Esprimo D7010 and Fujitsu Esprimo D9011

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo D9011 which was released in 2021. The Fujitsu Esprimo D7010 is older and entered production in 2020.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo D9011 as it is running a newer generation CPU. This is not to say that Fujitsu Esprimo D7010 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (4 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Fujitsu Esprimo D9011 is using the faster 3200 MT/s RAM. The Fujitsu Esprimo D7010 is slower by supporting RAM speeds of up to 2933 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 128 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

Both models have the same amount of USB ports for total count of 12. If this is not enough, using a USB hub is always a viable option. It's great that both of the models have USB 3.1 ports which will allow you to exchange data with your peripherals at up to 10Gb/s. But if you need maximum connectivity, go with the Fujitsu Esprimo D9011 as it has 4 USB3.1 ports (the Fujitsu Esprimo D7010 has 2).

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Fujitsu Esprimo D7010 comes with 2 ports, while the Fujitsu Esprimo D9011 has only 1. If you are planning to use multiple monitors, the Fujitsu Esprimo D7010 is the better choice.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Fujitsu Esprimo D9011 is better equipped as it comes with 5 SATA slot(s), while the Fujitsu Esprimo D7010 has 4 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Fujitsu Esprimo D9011 has 1 M.2 slots while the Fujitsu Esprimo D7010 comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Looking at the Power Supply Unit (PSU) of the two models we don't see any differences. For either of them you get a maximum power of 300 Watts. However be careful, many models have more than one power supply option. When buying your computer, it is a good idea to get a version with the most powerful PSU. This will potentially allow you to upgrade to a more powerful GPU for example.

Motherboard

Fujitsu_Esprimo_D7010_motherboard.jpg motherboard layoutFujitsu_Esprimo_D9011_motherboard.jpg motherboard layout