Dell OptiPlex 7080 SFF vs. Fujitsu Esprimo D7011

Comparison and Differences

Dell_OptiPlex_7080_SFF.jpg case front and back pannelFujitsu_Esprimo_D7011.jpg case front and back pannel
Model
Form factorSmallSmall
CPU optionsIntel Gen10 i3/i5/i7/i9; Intel Gen10&11 i3/i5/i7/i9
ChipsetQ470B560
Dedicated GPU *GeForce GTX 1650 Low ProfileRadeon RX 6400 Low Profile
RAMDIMM DDR4-2666/2933UDIMM DDR4-3200
RAM slots44
RAM speed2933 MT/s3200 MT/s
RAM max128 GB128 GB
USB portsUSB 3.1 Type C; (2x) USB-A 3.1; (3x) USB-A 3.0; (4x) USB-A 2.0; (2x) USB-A 3.0; (7x) USB-A 2.0; USB-A 3.1; USB-C 3.2
Video ports(2x) Display Port 1.4;(2x) DisplayPort 1.4
Other portsRJ45; Headset; Line-Out/In; Serial; (2x) PS2; RJ45; Headset, Line in; Line out
Optional portsHDMI2.0b/DP1.4/VGA/USB Type-C (DP Alt Mode); SD4.0; 2xWiFi antenna; Serial; PS/2; VGA; DVI; USB-C 3.1 (DP support 60W/15W)
SATA ports35
PCI slotsPCIe 3.0 x16; PCIe 3.0 x4 (open ended);PCIe 4.0 x16; PCIe 3.0 x1; PCIe 3.0 x16 (wired x4)
M.2 slotsM.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2280 M-key (PCIe); M.2 2230 (WiFi/BT) (2x) M.2 2280/2230 M-key (PCIe 4.0/3.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays3.5in/(2x)2.5in; 5.25in (slim); 3.5in; 2.5in; (2x) 5.25 inch slim
PSU200 W280/300 W
Weight5.28 Kg (11.63 lb)8.00 kg (17.64 lb)
Released20202021
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 7080 SFF and Fujitsu Esprimo D7011

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo D7011 which was released in 2021. The Dell OptiPlex 7080 SFF is older and entered production in 2020.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo D7011 as it is running a newer generation CPU. This is not to say that Dell OptiPlex 7080 SFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (4 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Fujitsu Esprimo D7011 is using the faster 3200 MT/s RAM. The Dell OptiPlex 7080 SFF is slower by supporting RAM speeds of up to 2933 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 128 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the Fujitsu Esprimo D7011 has 11 USB ports. The Dell OptiPlex 7080 SFF is inferior in this regard and packs 10 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. It's great that both of the models have USB 3.1 ports which will allow you to exchange data with your peripherals at up to 10Gb/s. But if you need maximum connectivity, go with the Dell OptiPlex 7080 SFF as it has 3 USB3.1 ports (the Fujitsu Esprimo D7011 has 1).

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Dell OptiPlex 7080 SFF comes with 2 ports, while the Fujitsu Esprimo D7011 has only 1. If you are planning to use multiple monitors, the Dell OptiPlex 7080 SFF is the better choice.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Fujitsu Esprimo D7011 is better equipped as it comes with 5 SATA slot(s), while the Dell OptiPlex 7080 SFF has 3 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 7080 SFF comes with a decent 200 Watt PSU, but the Fujitsu Esprimo D7011 has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_7080_SFF_motherboard.jpg motherboard layoutFujitsu_Esprimo_D7011_motherboard.jpg motherboard layout