Fujitsu Esprimo D538 vs. HP ProDesk 600 G6 SFF

Comparison and Differences

Fujitsu_Esprimo_D538.jpg case front and back pannelHP_ProDesk_600_G6_SFF.jpg case front and back pannel
Model
Form factorSmallSmall
CPU optionsIntel Gen8&9 i3/i5/i7; Pentium; CeleronIntel Gen10 i3/i5/i7; Celeron; Pentium;
ChipsetH310Q470
Dedicated GPU *Radeon RX 6400 Low ProfileGeForce GT 1030 Low Profile
RAMUDIMM DDR4-2666DIMM DDR4-3200
RAM slots24
RAM speed2666 MT/s3200 MT/s
RAM max32 GB128 GB
USB ports(4x) USB-A 3.0; (4x) USB-A 2.0USB-C 3.1; (2x)USB-A 3.1; (5x)USB-A 3.0; (2x)USB-A 2.0;
Video portsDisplayPort 1.2; DVI(2x) DisplayPort:
Other portsRJ45; Headphones; Mic; Line in; Line out; PS/2RJ45; Headset; Line-Out;
Optional portsVGA; eSATADP1.4/ HDMI2.0a/ VGA/ USB-C(DP1.4)/ (2x)USB-A 3.0/ LAN/ Serial; Serial/Thunderbolt3; SD card reader;
SATA ports33
PCI slotsPCIe 3.0 x16; PCIe 2.0 x16 (wired x4)PCIe 3.0 x16; PCIe x4 (open ended);
M.2 slotsM.2 2280/2230 M-key (PCIe 2.0 x2, NVMe)M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT);
Drive bays3.5in; 2.5in; 5.25 inch(2x)2.5in/3.5in; 5.25in (slim);
PSU210/280 W180/210 W
Weight5.00 kg (11.03 lb)3.9 kg (8.6 lb)
Released20182020
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Fujitsu Esprimo D538 and HP ProDesk 600 G6 SFF

If you are looking for a more modern desktop, then you should go with the HP ProDesk 600 G6 SFF which was released in 2020. The Fujitsu Esprimo D538 is older and entered production in 2018.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP ProDesk 600 G6 SFF as it is running a newer generation CPU. This is not to say that Fujitsu Esprimo D538 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The HP ProDesk 600 G6 SFF has 4 RAM slots while the Fujitsu Esprimo D538 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The HP ProDesk 600 G6 SFF is using the faster 3200 MT/s RAM. The Fujitsu Esprimo D538 is slower by supporting RAM speeds of up to 2666 MT/s. Additionally, if you will be needing a lot of RAM, better go for the HP ProDesk 600 G6 SFF as it has the ability to run 128 GB of RAM. The Fujitsu Esprimo D538 can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the HP ProDesk 600 G6 SFF has 10 USB ports. The Fujitsu Esprimo D538 is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the HP ProDesk 600 G6 SFF, is that it has 3 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Fujitsu Esprimo D538 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the HP ProDesk 600 G6 SFF comes with 2 ports, while the Fujitsu Esprimo D538 has only 1. If you are planning to use multiple monitors, the HP ProDesk 600 G6 SFF is the better choice.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 3 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 600 G6 SFF comes with a decent 210 Watt PSU, but the Fujitsu Esprimo D538 has a more powerful one rated at 280 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Fujitsu_Esprimo_D538_motherboard.jpg motherboard layoutHP_ProDesk_600_G6_SFF_motherboard.jpg motherboard layout