Dell XPS 8900 vs. Fujitsu Esprimo G5010

Comparison and Differences

Dell_XPS_8900.jpg case front and back pannelFujitsu_Esprimo_G5010.jpg case front and back pannel
Model
Form factorMini TowerMicro
CPU optionsIntel Gen6 i3/i5/i7;Intel Gen10 i3/i5
ChipsetZ170H410
Dedicated GPU *GeForce GTX 1080 TiN.A.
RAMDIMM DDR4-2133/2400 SODIMM DDR4-2933
RAM slots42
RAM speed2133 MT/s2933 MT/s
RAM max64 GB64 GB
USB ports(4x) USB-A 2.0; (6x) USB 3.0;(3x) USB-A 3.0; (3x) USB-A 2.0; USB-C 3.0
Video portsHDMI 1.4; DisplayPort 1.2;DisplayPort 1.2; HDMI 1.4b
Other portsRJ45; Mic; Headset; Card Reader;RJ45; Headset
Optional portsN.A.VGA
SATA ports51
PCI slotsPCIe 3.0 x16; (x2) PCIe x4;N.A.
M.2 slotsM.2 2230 (WiFi/BT)M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays(3x) 3.5in; (2x) 5.25in;2.5in
PSU460 W65 W
Weight13.3 kg (29.32 lb)0.80 kg (1.76 lb)
Released20152020
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell XPS 8900 and Fujitsu Esprimo G5010

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo G5010 which was released in 2020. The Dell XPS 8900 is older and entered production in 2015.

If you are looking for the smaller form factor the Fujitsu Esprimo G5010 is the right one for you. It is smaller than the Dell XPS 8900 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo G5010 as it is running a newer generation CPU. This is not to say that Dell XPS 8900 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Dell XPS 8900 has 4 RAM slots while the Fujitsu Esprimo G5010 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Fujitsu Esprimo G5010 is using the faster 2933 MT/s RAM. The Dell XPS 8900 is slower by supporting RAM speeds of up to 2133 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 64 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the Dell XPS 8900 has 10 USB ports. The Fujitsu Esprimo G5010 is inferior in this regard and packs 7 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Fujitsu Esprimo G5010, is that it has 1 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell XPS 8900 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

In case your monitor supports HDMI only, you will be happy to hear that both models come with an HDMI port.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell XPS 8900 is better equipped as it comes with 5 SATA slot(s), while the Fujitsu Esprimo G5010 has 1 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Fujitsu Esprimo G5010. Sadly, the Dell XPS 8900 has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo G5010 comes with a decent 65 Watt PSU, but the Dell XPS 8900 has a more powerful one rated at 460 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_XPS_8900_motherboard.jpg motherboard layoutFujitsu_Esprimo_G5010_motherboard.jpg motherboard layout