Dell Vostro 3902 vs. HP ProDesk 400 G1 SFF

Comparison and Differences

Dell_Vostro_3902.jpg case front and back pannelHP_ProDesk_400_G1_SFF.jpg case front and back pannel
Model
Form factorMini TowerSmall
CPU optionsIntel Gen4 i3/i5/i7; Pentium; Celeron;Intel Gen4 i3/i5/i7; Celeron; Pentium;
ChipsetH81 H81
Dedicated GPU *GeForce GTX 1660 SuperGeForce GTX 1650 Low Profile
RAMDIMM DDR3-1600DIMM DDR3-1600
RAM slots22
RAM speed1600 MT/s1600 MT/s
RAM max16 GB16 GB
USB ports(6x)USB-A 2.0; (2x)USB-A 3.0; (2x)USB-A 3.0; (6x)USB-A 2.0;
Video portsHDMI 1.2; VGA;DVI-D; VGA;
Other portsRJ45; Hdph; (2x) Mic; Line-Out; Line-In; PS2RJ45; Hdph; Mic; Line-Out; Line-In; Serial; (2x) PS2;
Optional portsN/AMedia card reader; Serial; Parallel;
SATA ports43
PCI slotsPCIe 2.0 x16; (2x) PCIe 2.0 x1; PCIPCIe x16; (3x) PCIe x1;
M.2 slotsN.A.N.A.
Drive bays3.5in; 5.25in;2.5in; (2x) 3.5in; 5.25in (slim)
PSU300 W240 W
Weight8.50 kg (18.73 lbs)5.9 kg (13.0 lb)
Released20142013
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell Vostro 3902 and HP ProDesk 400 G1 SFF

If you are looking for a more modern desktop, then you should go with the Dell Vostro 3902 which was released in 2014. The HP ProDesk 400 G1 SFF is older and entered production in 2013.

If you are looking for the smaller form factor the HP ProDesk 400 G1 SFF is the right one for you. It is smaller than the Dell Vostro 3902 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP ProDesk 400 G1 SFF as it is running a newer generation CPU. This is not to say that Dell Vostro 3902 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

None of the desktops has an advantage when it comes to the speed of the RAM being used. Both models support RAM speeds of up to 1600. In addition, you will be able to install the same amount of RAM in both models, and most probably 16 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

Both models have the same amount of USB ports for total count of 8. If this is not enough, using a USB hub is always a viable option. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

Nowadays, almost every new computer comes equipped with a DisplayPort. However, none of the devices being compared here has one. Don't worry though, DisplayPort adapters are very cheap and you can get virtually any combination of conversion types.

The Dell Vostro 3902 comes with an HDMI port, while the HP ProDesk 400 G1 SFF does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell Vostro 3902 is better equipped as it comes with 4 SATA slot(s), while the HP ProDesk 400 G1 SFF has 3 slot(s).

M.2 SSD interface allows you to transfer data with higher speeds compared to the old SATA interface. Unfortunately, neither the Dell Vostro 3902, nor the HP ProDesk 400 G1 SFF has one. However, you can still use a SATA SSD drive which should give you satisfactory performance.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 400 G1 SFF comes with a decent 240 Watt PSU, but the Dell Vostro 3902 has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_Vostro_3902_motherboard.jpg motherboard layoutHP_ProDesk_400_G1_SFF_motherboard.jpg motherboard layout