Dell OptiPlex 7050 MT vs. Dell Vostro 360 AIO

Comparison and Differences

Dell_OptiPlex_7050_MT.jpg case front and back pannelDell_Vostro_360_AIO.jpg case front and back pannel
Model
Form factorMini TowerSmall
CPU optionsIntel Gen6&7 i3/i5/i7; Intel Gen2 i3/i5/i7; Pentium;
ChipsetQ270H61
Dedicated GPU *GeForce GTX 1650 SuperN.A.
RAMDIMM DDR4-2133/2400 SO-DIMM DDR3-1333
RAM slots42
RAM speed2400 MT/s1333 MT/s
RAM max64 GB8 GB
USB portsUSB 3.0 Type C; (5x) USB-A 3.0; (4x) USB-A 2.0; (2x)USB-A 2.0; (4x)USB-A 3.0;
Video ports(2x) Display Port 1.2; HDMI 1.4;VGA;
Other portsSerial; (2x) PS2; RJ45; Headset; Line-Out; RJ45; Hdph; Mic; Line-Out; Media Card Reader; Mic Integrated
Optional portsVGA; Media Card Reader;N/A
SATA ports42
PCI slotsPCIe 3.0 x16; PCIe 3.0 x16 (wired x4); PCIe 3.0 x1; PCI; N.A.
M.2 slotsM.2 2280/2242 M-key (PCIe 3 .0 x4, NVMe)N.A.
Drive bays3.5in/5.25in; (2x) 2.5in; 5.25in (slim);3.5in; 5.25in;
PSU240 W150W/180 W
Weight7.93 kg (17.49 lb)9.35 kg (20.61 lbs)
Released20172012
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 7050 MT and Dell Vostro 360 AIO

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 7050 MT which was released in 2017. The Dell Vostro 360 AIO is older and entered production in 2012.

If you are looking for the smaller form factor the Dell Vostro 360 AIO is the right one for you. It is smaller than the Dell OptiPlex 7050 MT and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 7050 MT as it is running a newer generation CPU. This is not to say that Dell Vostro 360 AIO is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Dell OptiPlex 7050 MT has 4 RAM slots while the Dell Vostro 360 AIO has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Dell OptiPlex 7050 MT is using the faster 2400 MT/s RAM. The Dell Vostro 360 AIO is slower by supporting RAM speeds of up to 1333 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 7050 MT as it has the ability to run 64 GB of RAM. The Dell Vostro 360 AIO can do a bit less at max 8 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell OptiPlex 7050 MT has 10 USB ports. The Dell Vostro 360 AIO is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

Unfortunately, only the Dell OptiPlex 7050 MT has a DisplayPort. The Dell Vostro 360 AIO does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

The Dell OptiPlex 7050 MT comes with an HDMI port, while the Dell Vostro 360 AIO does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 7050 MT is better equipped as it comes with 4 SATA slot(s), while the Dell Vostro 360 AIO has 2 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Dell OptiPlex 7050 MT. Sadly, the Dell Vostro 360 AIO has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell Vostro 360 AIO comes with a decent 180 Watt PSU, but the Dell OptiPlex 7050 MT has a more powerful one rated at 240 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_7050_MT_motherboard.jpg motherboard layoutDell_Vostro_360_AIO_motherboard.jpg motherboard layout