Alienware Aurora R3 vs. Dell OptiPlex 980 DT

Comparison and Differences

Alienware_Aurora_R3.jpg case front and back pannelDell_OptiPlex_980_DT.jpg case front and back pannel
Model
Form factorMid TowerDesktop
CPU optionsIntel Gen2 i3/i5/i7;Intel Gen1 i3/i5/i7; Pentium Dual Core;
ChipsetP67Q57
Dedicated GPU *GeForce GTX 1650 SuperGeForce GTX 1650 Low Profile
RAMDIMM DDR3-1333/1866DIMM DDR3-1060/1333
RAM slots44
RAM speed1866 MT/s1333 MT/s
RAM max32 GB16 GB
USB ports(5x) USB 3.0 Type A; (8x) USB-A 2.0;(8x)USB-A 2.0;
Video portsN/ADisplayPort 1.2; VGA;
Other portsRJ45; Headset; Line-Out; Line-In; S/PDFI optical/analog;RJ45; Hdph; (2x) Mic; Line-Out; Line-In; PS2/COM; Serial; Parallel; eSATA
Optional portsN.A.N.A.
SATA ports44
PCI slots(x2) PCIe 3.0 x16; (x2) PCIe 3.0 x1;PCIe 2.0 x16; PCIe 2.0 x4;
M.2 slotsN.A.N.A.
Drive bays(4x) 3.25in; (3x) 5.25in;(2x)3.5in; 5.25in;
PSU525/875 W255 W
Weight22.09 kg (48.7 lb)8.30 kg (18.29 lb)
Released20112010
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Alienware Aurora R3 and Dell OptiPlex 980 DT

If you are looking for a more modern desktop, then you should go with the Alienware Aurora R3 which was released in 2011. The Dell OptiPlex 980 DT is older and entered production in 2010.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Alienware Aurora R3 as it is running a newer generation CPU. This is not to say that Dell OptiPlex 980 DT is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (4 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Alienware Aurora R3 is using the faster 1866 MT/s RAM. The Dell OptiPlex 980 DT is slower by supporting RAM speeds of up to 1333 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Alienware Aurora R3 as it has the ability to run 32 GB of RAM. The Dell OptiPlex 980 DT can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Alienware Aurora R3 has 13 USB ports. The Dell OptiPlex 980 DT is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

Unfortunately, only the Dell OptiPlex 980 DT has a DisplayPort. The Alienware Aurora R3 does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 4 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

M.2 SSD interface allows you to transfer data with higher speeds compared to the old SATA interface. Unfortunately, neither the Dell OptiPlex 980 DT, nor the Alienware Aurora R3 has one. However, you can still use a SATA SSD drive which should give you satisfactory performance.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 980 DT comes with a decent 255 Watt PSU, but the Alienware Aurora R3 has a more powerful one rated at 875 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Alienware_Aurora_R3_motherboard.jpg motherboard layoutDell_OptiPlex_980_DT_motherboard.jpg motherboard layout