Dell OptiPlex 7040 SFF vs. Dell OptiPlex 9010 DT

Comparison and Differences

Dell_OptiPlex_7040_SFF.jpg case front and back pannelDell_OptiPlex_9010_DT.jpg case front and back pannel
Model
Form factorSmallDesktop
CPU optionsIntel Gen6 i3/i5/i7Intel Gen2&3 i3/i5/i7; Celeron; Pentium;
ChipsetQ170Q77
Dedicated GPU *GeForce GT 1030 Low ProfileGeForce GTX 1650 Low Profile
RAMDIMM DDR4-2133 DIMM DDR3-1333/1600
RAM slots44
RAM speed2133 MT/s1600 MT/s
RAM max64 GB32 GB
USB ports(6x) USB-A 3.0; (4x) USB-A 2.0; (4x) USB-A 3.0; (6x) USB-A 2.0;
Video ports(2x) Display Port 1.2; HDMI 1.4;(2x) DisplayPort 1.1; VGA;
Other portsSerial; (2x) PS2; RJ45; Headset; Line-Out; Serial; (2x) PS2; RJ45; Hdph; Mic; Line-Out; Line-In;
Optional portsVGA; Media Card Reader;N.A.
SATA ports33
PCI slotsPCIe 3.0 x16; PCIe 3.0 x4;PCIe 3.0 x16; PCIe 2.0 x1; PCI; PCIe 2.0 x16 (wired x4);
M.2 slotsM.2 2280 M-key (PCIe 3.0 x4, NVMe) N.A.
Drive bays3.5in/(2x)2.5in; 5.25in (slim); 3.5in/2.5in; 2.5in; 5.25in;
PSU180 W250 W
Weight6.00 kg (13.22 lb)7.9 kg (17.38 lb)
Released20152012
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 7040 SFF and Dell OptiPlex 9010 DT

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 7040 SFF which was released in 2015. The Dell OptiPlex 9010 DT is older and entered production in 2012.

If you are looking for the smaller form factor the Dell OptiPlex 7040 SFF is the right one for you. It is smaller than the Dell OptiPlex 9010 DT and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 7040 SFF as it is running a newer generation CPU. This is not to say that Dell OptiPlex 9010 DT is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (4 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Dell OptiPlex 7040 SFF is using the faster 2133 MT/s RAM. The Dell OptiPlex 9010 DT is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 7040 SFF as it has the ability to run 64 GB of RAM. The Dell OptiPlex 9010 DT can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

Both models have the same amount of USB ports for total count of 10. If this is not enough, using a USB hub is always a viable option. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

The Dell OptiPlex 7040 SFF comes with an HDMI port, while the Dell OptiPlex 9010 DT does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 3 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Dell OptiPlex 7040 SFF. Sadly, the Dell OptiPlex 9010 DT has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 7040 SFF comes with a decent 180 Watt PSU, but the Dell OptiPlex 9010 DT has a more powerful one rated at 250 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_7040_SFF_motherboard.jpg motherboard layoutDell_OptiPlex_9010_DT_motherboard.jpg motherboard layout