Dell OptiPlex 7080 MT vs. HP ProDesk 600 G1 Mini
Comparison and Differences
|Model||Dell OptiPlex 7080 MT||HP ProDesk 600 G1 Mini|
|Form factor||Mini Tower||Micro|
|CPU options||Intel Gen10 i3/i5/i7/i9;||Intel Gen4 i3/i5/i7; Celeron; Pentium;|
|Dedicated GPU *||GeForce RTX 2070 Super||N.A.|
|RAM||DIMM DDR4-2666/2933||SDIMM DDR3-1600|
|RAM speed||2933 MT/s||1600 MT/s|
|RAM max||128 GB||16 GB|
|USB ports||USB 3.1 Type C; (2x) USB-A 3.1; (3x) USB-A 3.0; (4x) USB-A 2.0;||(4x)USB-A 3.0; (2x)USB-A 2.0;|
|Video ports||(2x) Display Port 1.4;||(2x) DisplayPort: VGA|
|Other ports||RJ45; Headset; Line-Out/In; Serial; (2x) PS2;||RJ45; Hdph; Mic; Line-Out;|
|Optional ports||HDMI2.0b/DP1.4/VGA/USB Type-C (DP Alt Mode); SD4.0; 2xWiFi antenna;||N.A.|
|PCI slots||PCIe 3.0 x16; PCIe 3.0 x4; PCIe x1; PCI;||N.A.|
|M.2 slots||M.2 2280/2230 M-key (PCIe 3.0 x4, SATA); M.2 2280 M-key (PCIe); M.2 2260? M-key (SD card); M.2 2230 (WiFi/BT)||M.2 2280 M-key (PCIe x4); M.2 2230 (WiFi/BT)|
|Drive bays||3.5in; (2x) 2.5in; 5.25in (slim);||2.5in;|
|PSU||260/360/500 W||65 W|
|Weight||9.35 kg (20.61 lb)||1.3 kg (2.9 lb)|
|Price**||Check Price||Check Price|
Differences between Dell OptiPlex 7080 MT and HP ProDesk 600 G1 Mini
If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 7080 MT which was released in 2020. The HP ProDesk 600 G1 Mini is older and entered production in 2014.
If you are looking for the smaller form factor the HP ProDesk 600 G1 Mini is the right one for you. It is smaller than the Dell OptiPlex 7080 MT and will fit more easily under your desk.
Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 7080 MT as it is running a newer generation CPU. This is not to say that HP ProDesk 600 G1 Mini is bad - it can still run some powerful CPUs, albeit being an older generation.
The Dell OptiPlex 7080 MT has 4 RAM slots while the HP ProDesk 600 G1 Mini has only 2 slot(s). Of course this is not something to worry about. Just make sure you take it into consideration when planning how much RAM will your system be using.The Dell OptiPlex 7080 MT is using the faster 2933 MT/s RAM. The HP ProDesk 600 G1 Mini is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 7080 MT as it has the ability to run 128 GB of RAM. The HP ProDesk 600 G1 Mini can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.
In total the Dell OptiPlex 7080 MT has 10 USB ports. The HP ProDesk 600 G1 Mini is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Dell OptiPlex 7080 MT, is that it has 3 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the HP ProDesk 600 G1 Mini has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.
The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.
None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.
SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 7080 MT is better equipped as it comes with 4 SATA slot(s), while the HP ProDesk 600 G1 Mini has 1 slot(s).
An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Dell OptiPlex 7080 MT has 1 M.2 slots while the HP ProDesk 600 G1 Mini comes with just 1.Remark: Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!
Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 600 G1 Mini comes with a decent 65 Watt PSU, but the Dell OptiPlex 7080 MT has a more powerful one rated at 500 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.