Dell OptiPlex 3040 MT vs. Dell OptiPlex 7050 SFF

Comparison and Differences

Dell_OptiPlex_3040_MT.jpg case front and back pannelDell_OptiPlex_7050_SFF.jpg case front and back pannel
Model
Form factorMini TowerSmall
CPU optionsIntel Gen6 i3/i5; Pentium; Celeron; Intel Gen6&7 i3/i5/i7;
ChipsetH110Q270
Dedicated GPU *GeForce GTX 1650 SuperGeForce GT 1030 Low Profile
RAMDIMM DDR3L-1600 DIMM DDR4-2133/2400
RAM slots24
RAM speed1600 MT/s2400 MT/s
RAM max16 GB64 GB
USB ports(4x) USB-A 3.0; (4x) USB-A 2.0; USB 3.0 Type C; (5x) USB-A 3.0; (4x) USB-A 2.0;
Video ports Display Port 1.2; HDMI 1.4;(2x) Display Port 1.2; HDMI 1.4;
Other portsRJ45; Headset; Line-Out; Serial; (2x) PS2; RJ45; Headset; Line-Out;
Optional portsSerial+PS2; VGA; Media Card Reader;VGA; Media Card Reader;
SATA ports33
PCI slotsPCIe 3.0 x16; (3x) PCIe 3.0 x1;PCIe 3.0 x16; PCIe 3.0 x4;
M.2 slotsN.A.M.2 2280/2242 M-key (PCIe 3.0 x4, NVMe)
Drive bays3.5in/5.25in; (2x) 2.5in; 5.25in slim;3.5in/(2x)2.5in; 5.25in (slim);
PSU240 W180 W
Weight7.93 kg (17.49 lb)5.26 kg (11.57 lb)
Released20152017
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 3040 MT and Dell OptiPlex 7050 SFF

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 7050 SFF which was released in 2017. The Dell OptiPlex 3040 MT is older and entered production in 2015.

If you are looking for the smaller form factor the Dell OptiPlex 7050 SFF is the right one for you. It is smaller than the Dell OptiPlex 3040 MT and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 7050 SFF as it is running a newer generation CPU. This is not to say that Dell OptiPlex 3040 MT is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Dell OptiPlex 7050 SFF has 4 RAM slots while the Dell OptiPlex 3040 MT has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Dell OptiPlex 7050 SFF is using the faster 2400 MT/s RAM. The Dell OptiPlex 3040 MT is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 7050 SFF as it has the ability to run 64 GB of RAM. The Dell OptiPlex 3040 MT can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell OptiPlex 7050 SFF has 10 USB ports. The Dell OptiPlex 3040 MT is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Dell OptiPlex 7050 SFF comes with 2 ports, while the Dell OptiPlex 3040 MT has only 1. If you are planning to use multiple monitors, the Dell OptiPlex 7050 SFF is the better choice.

In case your monitor supports HDMI only, you will be happy to hear that both models come with an HDMI port.

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 3 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Dell OptiPlex 7050 SFF. Sadly, the Dell OptiPlex 3040 MT has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 7050 SFF comes with a decent 180 Watt PSU, but the Dell OptiPlex 3040 MT has a more powerful one rated at 240 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_3040_MT_motherboard.jpg motherboard layoutDell_OptiPlex_7050_SFF_motherboard.jpg motherboard layout