Dell OptiPlex 7000 M vs. Dell OptiPlex SFF 7010 2023

Comparison and Differences

Dell_OptiPlex_7000_M.jpg case front and back pannelDell_OptiPlex_SFF_7010_2023.jpg case front and back pannel
Model
Form factorMicroSmall
CPU optionsIntel Gen 12 i3/i5/i7/i9;Intel Gen 12&13 i3/i5; Celeron; Pentium
ChipsetQ670Q670
Dedicated GPU *N.A.AMD Radeon RX 6400 Low Profile
RAMSODIMM DDR5-4800DIMM DDR4-3200
RAM slots22
RAM speed4800 MT/s3200 MT/s
RAM max64 GB64 GB
USB ports(3x) USB-A 3.0; (3x) USB-A 3.1; USB-C 3.2;(4x) USB-A 2.0; (4x) USB-A 3.0;
Video ports(2x) Display Port 1.4a;Display Port 1.4a; HDMI 1.4b;
Other portsRJ45; Audio; Line-Out/In;RJ45(2.5GHz); Audio
Optional portsHDMI 2.0b/Displayport/VGA/PS2/serial/USB Type-C;HDMI 2.0b/Displayport/VGA;
SATA ports02
PCI slotsN.A.PCIe 3.0 x16; PCIe 3.0 x1;
M.2 slots(2x)M.2 2230/2280 (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT) M.2 2230/2280 (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive baysN/A3.5in; 2.5in;
PSU90/130/180 W180/300 W
Weight1.25 kg (2.75 lb)4.87 kg (10.72 lb)
Released20222023
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 7000 M and Dell OptiPlex SFF 7010 2023

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex SFF 7010 2023 which was released in 2023. The Dell OptiPlex 7000 M is older and entered production in 2022.

If you are looking for the smaller form factor the Dell OptiPlex 7000 M is the right one for you. It is smaller than the Dell OptiPlex SFF 7010 2023 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex SFF 7010 2023 as it is running a newer generation CPU. This is not to say that Dell OptiPlex 7000 M is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Dell OptiPlex 7000 M is using the faster 4800 MT/s RAM. The Dell OptiPlex SFF 7010 2023 is slower by supporting RAM speeds of up to 3200 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 64 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the Dell OptiPlex 7000 M has 9 USB ports. The Dell OptiPlex SFF 7010 2023 is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Dell OptiPlex 7000 M, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell OptiPlex SFF 7010 2023 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

The Dell OptiPlex SFF 7010 2023 comes with an HDMI port, while the Dell OptiPlex 7000 M does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex SFF 7010 2023 is better equipped as it comes with 2 SATA slot(s), while the Dell OptiPlex 7000 M has 0 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Dell OptiPlex 7000 M has 1 M.2 slots while the Dell OptiPlex SFF 7010 2023 comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 7000 M comes with a decent 180 Watt PSU, but the Dell OptiPlex SFF 7010 2023 has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_7000_M_motherboard.jpg motherboard layoutDell_OptiPlex_SFF_7010_2023_motherboard.jpg motherboard layout