Dell OptiPlex 5080 SFF vs. HP ProDesk 600 G4 Mini
Comparison and Differences
Differences between Dell OptiPlex 5080 SFF and HP ProDesk 600 G4 Mini
If you are looking for the smaller form factor the HP ProDesk 600 G4 Mini is the right one for you. It is smaller than the Dell OptiPlex 5080 SFF and will fit more easily under your desk.
Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 5080 SFF as it is running a newer generation CPU. This is not to say that HP ProDesk 600 G4 Mini is bad - it can still run some powerful CPUs, albeit being an older generation.
The Dell OptiPlex 5080 SFF has 4 RAM slots while the HP ProDesk 600 G4 Mini has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.
The Dell OptiPlex 5080 SFF is using the faster 2933 MT/s RAM. The HP ProDesk 600 G4 Mini is slower by supporting RAM speeds of up to 2666 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 5080 SFF as it has the ability to run 128 GB of RAM. The HP ProDesk 600 G4 Mini can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.
In total the Dell OptiPlex 5080 SFF has 10 USB ports. The HP ProDesk 600 G4 Mini is inferior in this regard and packs 7 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. It's great that both of the models have USB 3.1 ports which will allow you to exchange data with your peripherals at up to 10Gb/s. But if you need maximum connectivity, go with the HP ProDesk 600 G4 Mini as it has 4 USB3.1 ports (the Dell OptiPlex 5080 SFF has 1).
The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.
None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.
SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 5080 SFF is better equipped as it comes with 3 SATA slot(s), while the HP ProDesk 600 G4 Mini has 1 slot(s).
An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the HP ProDesk 600 G4 Mini has 1 M.2 slots while the Dell OptiPlex 5080 SFF comes with just 1.
Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!
Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 600 G4 Mini comes with a decent 65 Watt PSU, but the Dell OptiPlex 5080 SFF has a more powerful one rated at 200 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.