Acer Veriton ES2710g vs. Dell OptiPlex 5060M

Comparison and Differences

Acer_Veriton_ES2710g.jpg case front and back pannelDell_OptiPlex_5060M.jpg case front and back pannel
Model
Form factorMini TowerMicro
CPU optionsIntel Gen7 i3/i5/i7; Pentium; CeleronIntel Gen8 i3/i5/i7; Pentium;
ChipsetH110Q370
Dedicated GPU *GeForce GTX 1650 SuperN.A.
RAMUDIMM DDR4-2400SODIMM DDR4-2400/2666
RAM slots22
RAM speed2400 MT/s2666 MT/s
RAM max32 GB32 GB
USB ports(4x) USB-A 3.0; (3x) USB-A 2.0USB 3.1 Type C; (5x) USB-A 3.0;
Video portsHDMI 1.2; VGA(2x) Display Port 1.2;
Other portsRJ45; (2x) Mic, Speaker; Line in; Line out;PS/2 ports;SerialRJ45; Headset; Line-Out;
Optional portsN.AHDMI2.0b/DP1.2/VGA/USB Type-C (DP Alt Mode); Serial; Serial+PS2; WiFi antenna;
SATA ports21
PCI slotsPCIe 3.0 x16N.A.
M.2 slotsN.A.M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays2.5/3.5in; 5.25 inch2.5in
PSU220/300 W90 W
Weight7.00 kg (15.40 lb)1.18 kg (2.60 lb)
Released20172018
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Acer Veriton ES2710g and Dell OptiPlex 5060M

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 5060M which was released in 2018. The Acer Veriton ES2710g is older and entered production in 2017.

If you are looking for the smaller form factor the Dell OptiPlex 5060M is the right one for you. It is smaller than the Acer Veriton ES2710g and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 5060M as it is running a newer generation CPU. This is not to say that Acer Veriton ES2710g is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Dell OptiPlex 5060M is using the faster 2666 MT/s RAM. The Acer Veriton ES2710g is slower by supporting RAM speeds of up to 2400 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 32 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

Both models have the same amount of USB ports for total count of 6. If this is not enough, using a USB hub is always a viable option. What is nice about the Dell OptiPlex 5060M, is that it has 1 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Acer Veriton ES2710g has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

Unfortunately, only the Dell OptiPlex 5060M has a DisplayPort. The Acer Veriton ES2710g does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

The Acer Veriton ES2710g comes with an HDMI port, while the Dell OptiPlex 5060M does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Acer Veriton ES2710g is better equipped as it comes with 2 SATA slot(s), while the Dell OptiPlex 5060M has 1 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Dell OptiPlex 5060M. Sadly, the Acer Veriton ES2710g has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 5060M comes with a decent 90 Watt PSU, but the Acer Veriton ES2710g has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Acer_Veriton_ES2710g_motherboard.jpg motherboard layoutDell_OptiPlex_5060M_motherboard.jpg motherboard layout