Acer Veriton M6690g vs. Dell OptiPlex 5040 MT

Comparison and Differences

Acer_Veriton_M6690g.jpg case front and back pannelDell_OptiPlex_5040_MT.jpg case front and back pannel
Model
Form factorMini TowerMini Tower
CPU optionsIntel Gen12 i3/i5/i7/i9Intel Gen6 i3/i5/i7
ChipsetQ670Q170
Dedicated GPU *RTX 3070GeForce GTX 1650 Super
RAMUDIMM DDR4-3200DIMM DDR3L-1600
RAM slots44
RAM speed3200 MT/s1600 MT/s
RAM max128 GB16 GB
USB ports(3x) USB-A 3.0; (6x) USB-A 2.0; USB-A 3.1; USB-C 3.1; USB-C 3.2(6x) USB-A 3.0; (4x) USB-A 2.0;
Video ports(2x) DisplayPort 1.4a; HDMI 2.0b; VGA(2x) Display Port 1.2; HDMI 1.4;
Other portsRJ45; (2x) Mic, Speaker; Line in; Line out; PS/2 portsSerial; (2x) PS2; RJ45; Headset; Line-Out;
Optional portsCard reader; Parallel; SerialVGA; Media Card Reader;
SATA ports54
PCI slotsPCIe 4.0 x16; PCIe 3.0 x1; PCI; PCIe 3.0 x16 (wired x4)PCIe 3.0 x16; PCIe 3.0 x16 (wired x4); PCIe 3.0 x1; PCI;
M.2 slots(2x) M.2 2280/2230 M-key (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT)M.2 2280 M-key (PCIe 3.0 x4, NVMe)
Drive bays(2x) 2.5/3.5in; 5.25 inch3.5in/5.25in; (2x) 2.5in; 5.25in (slim);
PSU300/500 W240 W
Weight10.40 kg (22.90 lb)8.00 kg (17.64 lb)
Released20222015
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Acer Veriton M6690g and Dell OptiPlex 5040 MT

If you are looking for a more modern desktop, then you should go with the Acer Veriton M6690g which was released in 2022. The Dell OptiPlex 5040 MT is older and entered production in 2015.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Acer Veriton M6690g as it is running a newer generation CPU. This is not to say that Dell OptiPlex 5040 MT is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (4 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Acer Veriton M6690g is using the faster 3200 MT/s RAM. The Dell OptiPlex 5040 MT is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Acer Veriton M6690g as it has the ability to run 128 GB of RAM. The Dell OptiPlex 5040 MT can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell OptiPlex 5040 MT has 10 USB ports. The Acer Veriton M6690g is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Acer Veriton M6690g, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell OptiPlex 5040 MT has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

In case your monitor supports HDMI only, you will be happy to hear that both models come with an HDMI port.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Acer Veriton M6690g is better equipped as it comes with 5 SATA slot(s), while the Dell OptiPlex 5040 MT has 4 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Acer Veriton M6690g has 1 M.2 slots while the Dell OptiPlex 5040 MT comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 5040 MT comes with a decent 240 Watt PSU, but the Acer Veriton M6690g has a more powerful one rated at 500 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Acer_Veriton_M6690g_motherboard.jpg motherboard layoutDell_OptiPlex_5040_MT_motherboard.jpg motherboard layout