Dell OptiPlex 5000 SFF vs. Fujitsu Esprimo G6012

Comparison and Differences

Dell_OptiPlex_5000_SFF.jpg case front and back pannelFujitsu_Esprimo_G6012.jpg case front and back pannel
Model
Form factorSmallMicro
CPU optionsIntel Gen 12 i3/i5/i7; PentiumIntel Gen12 i3/i5/i7; Pentium; Celeron
ChipsetQ670B660
Dedicated GPU *AMD Radeon RX 6400 Low ProfileN.A.
RAMDIMM DDR4-3200SODIMM DDR4-3200
RAM slots42
RAM speed3200 MT/s3200 MT/s
RAM max128 GB64 GB
USB ports(4x) USB-A 2.0; (5x) USB-A 3.0; USB-C 3.1;(2x) USB-A 3.0; (2x) USB-A 2.0; (2x) USB-A 3.1; (2x) USB-C 3.1 (DP 1.4)
Video ports(2x) Display Port 1.4a;DisplayPort 1.4; HDMI 2.1
Other portsRJ45; Audio; Line-Out/In;RJ45; Headset
Optional portsHDMI 2.0b/Displayport/VGA/PS2/serial/USB Type-C; SD-card slotHDMI 2.1; DP 1.4a; Serial
SATA ports32
PCI slotsPCIe 4.0 x16; PCIe 3.0 x4;N.A.
M.2 slotsM.2 2230/2280 (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT) M.2 2280/2230 M-key (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays3.5in; 2.5in;2.5in; 5.25 inch (ODD version)
PSU240/260/300 W90 W
Weight5.16 kg (11.39 lb)1.02 kg (2.60 lb)
Released20222022
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 5000 SFF and Fujitsu Esprimo G6012

Both computers, the Dell OptiPlex 5000 SFF and the Fujitsu Esprimo G6012, were released during the same year - 2022.

If you are looking for the smaller form factor the Fujitsu Esprimo G6012 is the right one for you. It is smaller than the Dell OptiPlex 5000 SFF and will fit more easily under your desk.

Processor

The two models have the same generation of Intel processors. We think that the 12 generation of Intel Processors have enough power to execute all of the home and office tasks that most people will care to do.

Memory

The Dell OptiPlex 5000 SFF has 4 RAM slots while the Fujitsu Esprimo G6012 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

None of the desktops has an advantage when it comes to the speed of the RAM being used. Both models support RAM speeds of up to 3200. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 5000 SFF as it has the ability to run 128 GB of RAM. The Fujitsu Esprimo G6012 can do a bit less at max 64 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell OptiPlex 5000 SFF has 10 USB ports. The Fujitsu Esprimo G6012 is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. It's great that both of the models have USB 3.1 ports which will allow you to exchange data with your peripherals at up to 10Gb/s. But if you need maximum connectivity, go with the Fujitsu Esprimo G6012 as it has 4 USB3.1 ports (the Dell OptiPlex 5000 SFF has 1).

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Dell OptiPlex 5000 SFF comes with 2 ports, while the Fujitsu Esprimo G6012 has only 1. If you are planning to use multiple monitors, the Dell OptiPlex 5000 SFF is the better choice.

The Fujitsu Esprimo G6012 comes with an HDMI port, while the Dell OptiPlex 5000 SFF does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 5000 SFF is better equipped as it comes with 3 SATA slot(s), while the Fujitsu Esprimo G6012 has 2 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo G6012 comes with a decent 90 Watt PSU, but the Dell OptiPlex 5000 SFF has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_5000_SFF_motherboard.jpg motherboard layoutFujitsu_Esprimo_G6012_motherboard.jpg motherboard layout