Acer Veriton X2660g vs. Dell OptiPlex 3090 SFF

Comparison and Differences

Acer_Veriton_X2660g.jpg case front and back pannelDell_OptiPlex_3090_SFF.jpg case front and back pannel
Model
Form factorSmallSmall
CPU optionsIntel Gen8 i3/i5/i7; Pentium; CeleronIntel Gen 10 i3/i5/i7/i9; Pentium
ChipsetB360Q470
Dedicated GPU *Radeon RX 6400 Low ProfileAMD Radeon RX 6400 Low Profile
RAMUDIMM DDR4-2666DIMM DDR4-2666
RAM slots22
RAM speed2666 MT/s2666 MT/s
RAM max32 GB64 GB
USB ports(2x) USB-A 3.0; (4x) USB-A 2.0; (2x) USB-A 3.1(4x) USB-A 2.0; (4x) USB-A 3.0;
Video portsDisplayPort 1.2; HDMI 1.4; VGADisplay Port 1.4a; HDMI 1.4b;
Other portsRJ45; (2x) Mic, Speaker; Line in; Line out; PS/2 ports; SerialRJ45; Audio; Line-Out/In;
Optional portsSerial; Parallel; Card readerHDMI 2.0b/Displayport/VGA;
SATA ports42
PCI slotsPCIe 3.0 x16; (2x) PCIe 3.0 x1; PCIPCIe 3.0 x16; (2x) PCIe 3.0 x1;
M.2 slotsM.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)M.2 2230/2280 (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays3.5in; 5.25 inch slim3.5in; 2.5in; 5.25in (slim);
PSU180/250 W200 W
Weight5.00 kg (11.02 lb)5.10 kg (11.25 lb)
Released20182021
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Acer Veriton X2660g and Dell OptiPlex 3090 SFF

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 3090 SFF which was released in 2021. The Acer Veriton X2660g is older and entered production in 2018.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 3090 SFF as it is running a newer generation CPU. This is not to say that Acer Veriton X2660g is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

None of the desktops has an advantage when it comes to the speed of the RAM being used. Both models support RAM speeds of up to 2666. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 3090 SFF as it has the ability to run 64 GB of RAM. The Acer Veriton X2660g can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

Both models have the same amount of USB ports for total count of 8. If this is not enough, using a USB hub is always a viable option. What is nice about the Acer Veriton X2660g, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell OptiPlex 3090 SFF has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Dell OptiPlex 3090 SFF comes with 2 ports, while the Acer Veriton X2660g has only 1. If you are planning to use multiple monitors, the Dell OptiPlex 3090 SFF is the better choice.

The Acer Veriton X2660g comes with an HDMI port, while the Dell OptiPlex 3090 SFF does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Acer Veriton X2660g is better equipped as it comes with 4 SATA slot(s), while the Dell OptiPlex 3090 SFF has 2 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 3090 SFF comes with a decent 200 Watt PSU, but the Acer Veriton X2660g has a more powerful one rated at 250 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Acer_Veriton_X2660g_motherboard.jpg motherboard layoutDell_OptiPlex_3090_SFF_motherboard.jpg motherboard layout