Dell OptiPlex 3050M vs. Dell Vostro 5880

Comparison and Differences

Dell_OptiPlex_3050M.jpg case front and back pannelDell_Vostro_5880.jpg case front and back pannel
Model
Form factorMicroMini Tower
CPU optionsIntel Gen6&7 i3/i5; Pentium; Celeron;Intel Gen10 i3/i5/i7; Celeron; Pentium;
ChipsetB250H470
Dedicated GPU *N.A.GeForce RTX 2070 Super
RAMSODIMM DDR4-2133/2400 DIMM DDR4-2666/2933
RAM slots22
RAM speed2400 MT/s2933 MT/s
RAM max32 GB64 GB
USB ports(4x) USB-A 3.0; (2x) USB-A 2.0; (4x) USB-A 3.0; (4x) USB-A 2.0; USB 3.0 Type C;
Video portsDisplay Port 1.2; HDMI 1.4;HDMI 1.4b; DisplayPort 1.4;
Other portsRJ45; Headset; Line-Out; RJ45; Headset; Mic; Line-Out;
Optional portsDP1.2/VGA/Serial+PS2/Serial; WiFi antenna;SD card reader
SATA ports14
PCI slotsN.A.PCIe 3.0 x16; (2x) PCIe 3.0 x1;
M.2 slotsM.2 2280/2242 M-key (PCIe 3.0 x2, NVMe) ; M.2 2230 (WiFi/BT) M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT);
Drive bays2.5in;3.5in; 9.5mm
PSU65 W260/460W
Weight1.18 kg (2.6 lb)6.03 kg (13.28 lbs)
Released20172020
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 3050M and Dell Vostro 5880

If you are looking for a more modern desktop, then you should go with the Dell Vostro 5880 which was released in 2020. The Dell OptiPlex 3050M is older and entered production in 2017.

If you are looking for the smaller form factor the Dell OptiPlex 3050M is the right one for you. It is smaller than the Dell Vostro 5880 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell Vostro 5880 as it is running a newer generation CPU. This is not to say that Dell OptiPlex 3050M is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Dell Vostro 5880 is using the faster 2933 MT/s RAM. The Dell OptiPlex 3050M is slower by supporting RAM speeds of up to 2400 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell Vostro 5880 as it has the ability to run 64 GB of RAM. The Dell OptiPlex 3050M can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell Vostro 5880 has 9 USB ports. The Dell OptiPlex 3050M is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

In case your monitor supports HDMI only, you will be happy to hear that both models come with an HDMI port.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell Vostro 5880 is better equipped as it comes with 4 SATA slot(s), while the Dell OptiPlex 3050M has 1 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 3050M comes with a decent 65 Watt PSU, but the Dell Vostro 5880 has a more powerful one rated at 460 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_3050M_motherboard.jpg motherboard layoutDell_Vostro_5880_motherboard.jpg motherboard layout