Dell OptiPlex 3050 SFF vs. Fujitsu Esprimo P9011

Comparison and Differences

Dell_OptiPlex_3050_SFF.jpg case front and back pannelFujitsu_Esprimo_P9011.jpg case front and back pannel
Model
Form factorSmallMini Tower
CPU optionsIntel Gen6&7 i3/i5; Pentium; Celeron;Intel Gen10&11 i3/i5/i7/i9
ChipsetB250Q570
Dedicated GPU *GeForce GT 1030 Low ProfileGeForce GTX 1650 Super
RAMDIMM DDR4-2133/2400 UDIMM DDR4-3200
RAM slots24
RAM speed2400 MT/s3200 MT/s
RAM max32 GB128 GB
USB ports(4x) USB-A 3.0; (4x) USB-A 2.0; (3x) USB-A 3.0; (4x) USB-A 2.0; (4x) USB-A 3.1; USB-C 3.2
Video portsDisplay Port 1.2; HDMI 1.4;(2x) DisplayPort 1.4
Other portsRJ45; Headset; Line-Out; RJ45; Headset, Line in; Line out
Optional portsSerial+PS2; VGA; Media Card Reader;Serial; PS/2; VGA; DVI; USB-C 3.1 (DP support 60W/15W)
SATA ports25
PCI slotsPCIe 3.0 x16; PCIe 3.0 x1; PCIe 4.0 x16; PCIe 3.0 x1; PCIe 3.0 x16 (wired x4)
M.2 slotsM.2 2280/2242 M-key (PCIe 3.0 x2, NVMe) (2x) M.2 2280/2230 M-key (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays3.5in/(2x)2.5in; 5.25in (slim); (3x) 3.5in; 2.5in; (2x) 5.25 inch
PSU180 W280/300 W
Weight5.14 kg (11.42 lb)10.00 kg (24.00 lb)
Released20172021
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 3050 SFF and Fujitsu Esprimo P9011

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo P9011 which was released in 2021. The Dell OptiPlex 3050 SFF is older and entered production in 2017.

If you are looking for the smaller form factor the Dell OptiPlex 3050 SFF is the right one for you. It is smaller than the Fujitsu Esprimo P9011 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo P9011 as it is running a newer generation CPU. This is not to say that Dell OptiPlex 3050 SFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Fujitsu Esprimo P9011 has 4 RAM slots while the Dell OptiPlex 3050 SFF has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Fujitsu Esprimo P9011 is using the faster 3200 MT/s RAM. The Dell OptiPlex 3050 SFF is slower by supporting RAM speeds of up to 2400 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Fujitsu Esprimo P9011 as it has the ability to run 128 GB of RAM. The Dell OptiPlex 3050 SFF can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Fujitsu Esprimo P9011 has 12 USB ports. The Dell OptiPlex 3050 SFF is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Fujitsu Esprimo P9011, is that it has 4 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell OptiPlex 3050 SFF has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

The Dell OptiPlex 3050 SFF comes with an HDMI port, while the Fujitsu Esprimo P9011 does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Fujitsu Esprimo P9011 is better equipped as it comes with 5 SATA slot(s), while the Dell OptiPlex 3050 SFF has 2 slot(s).

An M.2 SSD can be several times faster than a SATA one. Thus, we are happy to see that both models support the M.2 interface. However, the Fujitsu Esprimo P9011 has 1 M.2 slots while the Dell OptiPlex 3050 SFF comes with just 1.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 3050 SFF comes with a decent 180 Watt PSU, but the Fujitsu Esprimo P9011 has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_3050_SFF_motherboard.jpg motherboard layoutFujitsu_Esprimo_P9011_motherboard.jpg motherboard layout