Dell OptiPlex 3050 SFF vs. Dell OptiPlex 7060 MT

Comparison and Differences

Dell_OptiPlex_3050_SFF.jpg case front and back pannelDell_OptiPlex_7060_MT.jpg case front and back pannel
Model
Form factorSmallMini Tower
CPU optionsIntel Gen6&7 i3/i5; Pentium; Celeron;Intel Gen8 i3/i5/i7;
ChipsetB250Q370
Dedicated GPU *GeForce GT 1030 Low ProfileGeForce GTX 1650 Super
RAMDIMM DDR4-2133/2400 DIMM DDR4-2400/2666
RAM slots24
RAM speed2400 MT/s2666 MT/s
RAM max32 GB64 GB
USB ports(4x) USB-A 3.0; (4x) USB-A 2.0; USB 3.1 Type C; (5x) USB-A 3.0; (4x) USB-A 2.0;
Video portsDisplay Port 1.2; HDMI 1.4;(2x) Display Port 1.2;
Other portsRJ45; Headset; Line-Out; RJ45; Headset; Line-Out; Serial; (2x) PS2;
Optional portsSerial+PS2; VGA; Media Card Reader;HDMI2.0b/DP1.2/VGA/USB Type-C (DP Alt Mode); Media Card Reader; WiFi antenna;
SATA ports24
PCI slotsPCIe 3.0 x16; PCIe 3.0 x1; PCIe 3.0 x16; PCIe 3.0 x16 (wired x4); PCIe 3.0 x1; PCI;
M.2 slotsM.2 2280/2242 M-key (PCIe 3.0 x2, NVMe) M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays3.5in/(2x)2.5in; 5.25in (slim); 3.5in/5.25in; (2x) 2.5in; 5.25in (slim);
PSU180 W260 W
Weight5.14 kg (11.42 lb)7.93 kg (17.49 lb)
Released20172018
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 3050 SFF and Dell OptiPlex 7060 MT

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 7060 MT which was released in 2018. The Dell OptiPlex 3050 SFF is older and entered production in 2017.

If you are looking for the smaller form factor the Dell OptiPlex 3050 SFF is the right one for you. It is smaller than the Dell OptiPlex 7060 MT and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 7060 MT as it is running a newer generation CPU. This is not to say that Dell OptiPlex 3050 SFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Dell OptiPlex 7060 MT has 4 RAM slots while the Dell OptiPlex 3050 SFF has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Dell OptiPlex 7060 MT is using the faster 2666 MT/s RAM. The Dell OptiPlex 3050 SFF is slower by supporting RAM speeds of up to 2400 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell OptiPlex 7060 MT as it has the ability to run 64 GB of RAM. The Dell OptiPlex 3050 SFF can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell OptiPlex 7060 MT has 10 USB ports. The Dell OptiPlex 3050 SFF is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Dell OptiPlex 7060 MT, is that it has 1 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell OptiPlex 3050 SFF has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the Dell OptiPlex 7060 MT comes with 2 ports, while the Dell OptiPlex 3050 SFF has only 1. If you are planning to use multiple monitors, the Dell OptiPlex 7060 MT is the better choice.

The Dell OptiPlex 3050 SFF comes with an HDMI port, while the Dell OptiPlex 7060 MT does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 7060 MT is better equipped as it comes with 4 SATA slot(s), while the Dell OptiPlex 3050 SFF has 2 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 3050 SFF comes with a decent 180 Watt PSU, but the Dell OptiPlex 7060 MT has a more powerful one rated at 260 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_3050_SFF_motherboard.jpg motherboard layoutDell_OptiPlex_7060_MT_motherboard.jpg motherboard layout