Dell OptiPlex 3040M vs. HP EliteDesk 800 G1 SFF

Comparison and Differences

Dell_OptiPlex_3040M.jpg case front and back pannelHP_EliteDesk_800_G1_SFF.jpg case front and back pannel
Model
Form factorMicroSmall
CPU optionsIntel Gen6 i3/i5; Pentium; Celeron; Intel Gen4 i3/i5/i7; Celeron; Pentium;
ChipsetH110Q87
Dedicated GPU *N.A.GeForce GTX 1650 Low Profile
RAMSODIMM DDR3L-1600 DIMM DDR3-1600
RAM slots24
RAM speed1600 MT/s1600 MT/s
RAM max16 GB32 GB
USB ports(4x) USB-A 3.0; (2x) USB-A 2.0; (4x)USB-A 3.0; (6x)USB-A 2.0;
Video portsDisplay Port 1.2; HDMI 1.4;(2x) DisplayPort 1.2; VGA;
Other portsRJ45; Headset; Line-Out; Serial; (2x) PS2; RJ45; Hdph; Mic; Line-Out; Line-In;
Optional portsSerial+PS2/Serial/VGA; WiFi antenna;Media card reader (USB 3.0); Serial; Parallel;
SATA ports13
PCI slotsN.A.PCIe 3.0 x16; (2x) PCIe 2.0 x1; PCIe 2.0 x16 (wired x4);
M.2 slotsM.2 2230 (WiFi/BT)N.A.
Drive bays2.5in;2.5in; (2x) 3.5in; 5.25in; 5.25in (slim)
PSU65 W320 W
Weight1.28 kg (2.82 lb)7.6 kg (16.75 lb)
Released20152013
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell OptiPlex 3040M and HP EliteDesk 800 G1 SFF

If you are looking for a more modern desktop, then you should go with the Dell OptiPlex 3040M which was released in 2015. The HP EliteDesk 800 G1 SFF is older and entered production in 2013.

If you are looking for the smaller form factor the Dell OptiPlex 3040M is the right one for you. It is smaller than the HP EliteDesk 800 G1 SFF and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Dell OptiPlex 3040M as it is running a newer generation CPU. This is not to say that HP EliteDesk 800 G1 SFF is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The HP EliteDesk 800 G1 SFF has 4 RAM slots while the Dell OptiPlex 3040M has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

None of the desktops has an advantage when it comes to the speed of the RAM being used. Both models support RAM speeds of up to 1600. Additionally, if you will be needing a lot of RAM, better go for the HP EliteDesk 800 G1 SFF as it has the ability to run 32 GB of RAM. The Dell OptiPlex 3040M can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the HP EliteDesk 800 G1 SFF has 10 USB ports. The Dell OptiPlex 3040M is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

DisplayPort is crucial for any desktop machine. It is good to see that both models are featuring DisplayPorts. However, the HP EliteDesk 800 G1 SFF comes with 2 ports, while the Dell OptiPlex 3040M has only 1. If you are planning to use multiple monitors, the HP EliteDesk 800 G1 SFF is the better choice.

The Dell OptiPlex 3040M comes with an HDMI port, while the HP EliteDesk 800 G1 SFF does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the HP EliteDesk 800 G1 SFF is better equipped as it comes with 3 SATA slot(s), while the Dell OptiPlex 3040M has 1 slot(s).

M.2 SSD interface allows you to transfer data with higher speeds compared to the old SATA interface. Unfortunately, neither the Dell OptiPlex 3040M, nor the HP EliteDesk 800 G1 SFF has one. However, you can still use a SATA SSD drive which should give you satisfactory performance.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 3040M comes with a decent 65 Watt PSU, but the HP EliteDesk 800 G1 SFF has a more powerful one rated at 320 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_OptiPlex_3040M_motherboard.jpg motherboard layoutHP_EliteDesk_800_G1_SFF_motherboard.jpg motherboard layout