Dell OptiPlex 3010 MT vs. HP ProDesk 600 G3 Mini
Comparison and Differences
|Model||Dell OptiPlex 3010 MT||HP ProDesk 600 G3 Mini|
|Form factor||Mini Tower||Micro|
|CPU options||Intel Gen2&3 i3/i5; Celeron; Pentium;||Intel Gen6&7 i3/i5/i7; Celeron; Pentium;|
|Dedicated GPU *||GeForce GTX 1650 Super||N.A.|
|RAM||DIMM DDR3-1333/1600||SODIMM DDR4-2400|
|RAM speed||1600 MT/s||2400 MT/s|
|RAM max||8 GB||32 GB|
|USB ports||(8x)USB-A 2.0;||USB-C 3.0; (6x)USB-A 3.0;|
|Video ports||HDMI 1.2; VGA;||(2x) DisplayPort:|
|Other ports||RJ45; Hdph; (2x) Mic; Line-Out; Line-In;||RJ45; Headset; Hdph;|
|Optional ports||N.A.||DP/HDMI/VGA/USB-C(DP)/Serial; WiFi antenna;|
|PCI slots||PCIe 2.0 x16; (3x) PCIe 2.0 x1;||N.A.|
|M.2 slots||N.A.||M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT);|
|Drive bays||(2x) 3.5-inch/2.5-inch; (2x) 5.25-inch;||2.5-inch;|
|PSU||ATX 265 W||65/90 W|
|Weight||8.87 kg (19.55 lb)||1.21 kg (2.67 lb)|
|Price**||Check Price||Check Price|
Differences between Dell OptiPlex 3010 MT and HP ProDesk 600 G3 Mini
If a more modern desktop is what you are looking for, then you should go with the HP ProDesk 600 G3 Mini which was released in 2017. The Dell OptiPlex 3010 MT is older and entered production in 2012.
If you are looking for the smaller form factor the HP ProDesk 600 G3 Mini is the right one for you. It is smaller than the Dell OptiPlex 3010 MT and will fit more easily under your desk.
Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP ProDesk 600 G3 Mini as it is running a newer generation CPU. This is not to say that Dell OptiPlex 3010 MT is bad - it can still run some powerful CPUs, albeit being an older generation.
RAM slots is where your insert your RAM sticks. Each of those two models has 2 RAM slot(s) which should be taken into account when planning how much and what combination of RAM you are going to need.The HP ProDesk 600 G3 Mini is using the faster 2400 MT/s RAM. The Dell OptiPlex 3010 MT is slower by supporting RAM speeds of only up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the HP ProDesk 600 G3 Mini as it has the ability to run 32 GB of RAM. The Dell OptiPlex 3010 MT can do a bit less at max 8 GB. Most of the times, this should be sufficient for most users.
In total the Dell OptiPlex 3010 MT has 8 USB ports. The HP ProDesk 600 G3 Mini is inferior in this regard and packs 7 USB ports. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals you will need to look at other models.
Unfortunately, only the HP ProDesk 600 G3 Mini has a DisplayPort. The Dell OptiPlex 3010 MT does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of mode conversion.
The Dell OptiPlex 3010 MT comes with an HDMI port, while the HP ProDesk 600 G3 Mini does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).
SATA port is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 3010 MT is better equipped as it comes with 4 SATA slot(s).
If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the HP ProDesk 600 G3 Mini. Sadly, the Dell OptiPlex 3010 MT has no such slot, and you will be forced to use the SATA interface instead.Remark: Make sure that the M.2 slot supports the PCIe (NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6 Gb/s, while the PCIe 3.0 x4 will support speeds up to 32 Gb/s!
Having a Power Supply Unit with high power rating is important if you are going to use components which require extra power. The HP ProDesk 600 G3 Mini comes with a decent 90 Watt PSU, but the Dell OptiPlex 3010 MT has a more powerful one rated at 265 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one.