Dell G5 5000 vs. Dell OptiPlex 3080M

Comparison and Differences

Dell_G5_5000.jpg case front and back pannelDell_OptiPlex_3080M.jpg case front and back pannel
Model
Form factorMini TowerMicro
CPU optionsIntel Gen10 i3/i5/i7/i9;Intel Gen10 i3/i5/i7; Pentium; Celeron;
ChipsetH470B460
Dedicated GPU *GeForce RTX 2080N.A.
RAMDIMM DDR4-2666/2933SODIMM DDR4-2666
RAM slots42
RAM speed2933 MT/s2666 MT/s
RAM max128 GB64 GB
USB ports(5x) USB 3.0 Type A; (4x) USB-A 2.0; USB 3.0 Type C;(4x) USB-A 3.0; (2x) USB-A 2.0;
Video portsN/ADisplay Port 1.4; HDMI 1.4b;
Other portsRJ45; Headset; Mic; Line-Out; Front, side, center, rare outputs;RJ45; Headset; Line-Out;
Optional portsN.A.Serial/PS2/DP 1.4/HDMI 2.0b/VGA; (2x)WiFi antenna;
SATA ports31
PCI slotsPCIe 3.0 x16; PCIe 3.0 x4; PCIe 3.0 x1;N.A.
M.2 slotsM.2 2230 (WiFi/BT); M.2 2230/2280 M-key (PCIe 3.0 x4, NVMe);M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays(2x) 2.5in; 3.25in;2.5in;
PSU360/500 W65 W
Weight8.20 kg (18.07 lbs)1.28 kg (2.82 lb)
Released20202020
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Dell G5 5000 and Dell OptiPlex 3080M

Both computers, the Dell OptiPlex 3080M and the Dell G5 5000, were released during the same year - 2020.

If you are looking for the smaller form factor the Dell OptiPlex 3080M is the right one for you. It is smaller than the Dell G5 5000 and will fit more easily under your desk.

Processor

The two models have the same generation of Intel processors. We think that the 10 generation of Intel Processors have enough power to execute all of the home and office tasks that most people will care to do.

Memory

The Dell G5 5000 has 4 RAM slots while the Dell OptiPlex 3080M has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Dell G5 5000 is using the faster 2933 MT/s RAM. The Dell OptiPlex 3080M is slower by supporting RAM speeds of up to 2666 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Dell G5 5000 as it has the ability to run 128 GB of RAM. The Dell OptiPlex 3080M can do a bit less at max 64 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell G5 5000 has 9 USB ports. The Dell OptiPlex 3080M is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Dell G5 5000, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell OptiPlex 3080M has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

Unfortunately, only the Dell OptiPlex 3080M has a DisplayPort. The Dell G5 5000 does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

The Dell OptiPlex 3080M comes with an HDMI port, while the Dell G5 5000 does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell G5 5000 is better equipped as it comes with 3 SATA slot(s), while the Dell OptiPlex 3080M has 1 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 3080M comes with a decent 65 Watt PSU, but the Dell G5 5000 has a more powerful one rated at 500 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Dell_G5_5000_motherboard.jpg motherboard layoutDell_OptiPlex_3080M_motherboard.jpg motherboard layout