Alienware Aurora R8 vs. HP ProDesk 400 G6 SFF

Comparison and Differences

Alienware_Aurora_R8.jpg case front and back pannelHP_ProDesk_400_G6_SFF.jpg case front and back pannel
Model
Form factorMid TowerSmall
CPU optionsIntel Gen8&9 i3/i5/i7/i9;Intel Gen8&9 i3/i5/i7; Celeron; Pentium;
ChipsetZ370B360
Dedicated GPU *GeForce RTX 2080 TiGeForce GT 1030 Low Profile
RAMDIMM DDR4-2666/3000DIMM DDR4-2666
RAM slots42
RAM speed3000 MT/s2666 MT/s
RAM max64 GB64 GB
USB ports(4x) USB 3.0 Type A; (5x) USB-A 2.0; USB 3.1 Type C; USB 3.1 Type A; USB 3.0 Type C;(4x)USB-A 3.0; (4x)USB-A 2.0;
Video portsN/ADisplayPort; VGA;
Other portsRJ45; Headset; Line-Out; Line-In; S/PDFI optical/analog; Front, side, center, rare outputs;RJ45; Headset; Line-In; Line-Out;
Optional portsDisplayPortSD card reader; Serial; Serial and (2x) PS2; DP/HDMI/VGA/USB-C;
SATA ports42
PCI slots(x2) PCIe 3.0 x16; (x2) PCIe 3.0 x4;PCIe 3.0 x16; PCIe 3.0 x1 ;
M.2 slotsM.2 2230 (WiFi/BT); M.2 2242/2260/2280 (PCIe 3.0 x4, NVMe); M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT)
Drive bays(2x) 2.5in; 3.25in; 9.5mm; U.2(2x) 2.5/3.5in; 5.25in (slim);
PSU460/850 W180 W
Weight14.82 kg (32.67 lb)4.6 kg (10.14 lb)
Released20182019
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Alienware Aurora R8 and HP ProDesk 400 G6 SFF

If you are looking for a more modern desktop, then you should go with the HP ProDesk 400 G6 SFF which was released in 2019. The Alienware Aurora R8 is older and entered production in 2018.

If you are looking for the smaller form factor the HP ProDesk 400 G6 SFF is the right one for you. It is smaller than the Alienware Aurora R8 and will fit more easily under your desk.

Processor

The two models have the same generation of Intel processors. We think that the 9 generation of Intel Processors have enough power to execute all of the home and office tasks that most people will care to do.

Memory

The Alienware Aurora R8 has 4 RAM slots while the HP ProDesk 400 G6 SFF has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Alienware Aurora R8 is using the faster 3000 MT/s RAM. The HP ProDesk 400 G6 SFF is slower by supporting RAM speeds of up to 2666 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 64 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the Alienware Aurora R8 has 12 USB ports. The HP ProDesk 400 G6 SFF is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Alienware Aurora R8, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the HP ProDesk 400 G6 SFF has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

Unfortunately, only the HP ProDesk 400 G6 SFF has a DisplayPort. The Alienware Aurora R8 does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Alienware Aurora R8 is better equipped as it comes with 4 SATA slot(s), while the HP ProDesk 400 G6 SFF has 2 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 400 G6 SFF comes with a decent 180 Watt PSU, but the Alienware Aurora R8 has a more powerful one rated at 850 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Alienware_Aurora_R8_motherboard.jpg motherboard layoutHP_ProDesk_400_G6_SFF_motherboard.jpg motherboard layout