Alienware Aurora R13 vs. Fujitsu Esprimo G558

Comparison and Differences

Alienware_Aurora_R13.jpg case front and back pannelFujitsu_Esprimo_G558.jpg case front and back pannel
Model
Form factorMid TowerMicro
CPU optionsIntel Gen12 i3/i5/i7/i9;Intel Gen8&9 i3/i5/i7; Pentium; Celeron
ChipsetZ690H310
Dedicated GPU *GeForce RTX 3090N.A.
RAMDIMM DDR4-4400SODIMM DDR4-2666
RAM slots42
RAM speed4400 MT/s2666 MT/s
RAM max128 GB32 GB
USB ports(5x) USB 3.0 Type A; (4x) USB-A 2.0; (2x) USB 3.1 Type C; USB 3.2 Type C;(3x) USB-A 3.0; (3x) USB-A 2.0
Video portsN/ADisplayPort 1.2; HDMI
Other portsRJ45; Headset; Line-Out; Line-In; S/PDFI optical/analog; Front, side, center, rare outputs;RJ45; Headphones;
Optional portsN.A.VGA; USB-C 3.0
SATA ports31
PCI slots(x2) PCIe 5.0 x16; (x2) PCIe 3.0 x4;N.A.
M.2 slotsM.2 2280/2230 M-key (PCIe 4.0 x4, NVMe); M.2 2230 (WiFi/BT); M.2 2280/2230 M-key (PCIe 2.0 x2, NVMe); M.2 2230 (WiFi/BT)
Drive bays3.25in;2.5in
PSU460/750 W65 W
Weight16.05 kg (35.38 lb)0.80 kg (1.76 lb)
Released20212018
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Alienware Aurora R13 and Fujitsu Esprimo G558

If you are looking for a more modern desktop, then you should go with the Alienware Aurora R13 which was released in 2021. The Fujitsu Esprimo G558 is older and entered production in 2018.

If you are looking for the smaller form factor the Fujitsu Esprimo G558 is the right one for you. It is smaller than the Alienware Aurora R13 and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Alienware Aurora R13 as it is running a newer generation CPU. This is not to say that Fujitsu Esprimo G558 is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Alienware Aurora R13 has 4 RAM slots while the Fujitsu Esprimo G558 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Alienware Aurora R13 is using the faster 4400 MT/s RAM. The Fujitsu Esprimo G558 is slower by supporting RAM speeds of up to 2666 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Alienware Aurora R13 as it has the ability to run 128 GB of RAM. The Fujitsu Esprimo G558 can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Alienware Aurora R13 has 12 USB ports. The Fujitsu Esprimo G558 is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Alienware Aurora R13, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Fujitsu Esprimo G558 has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

Unfortunately, only the Fujitsu Esprimo G558 has a DisplayPort. The Alienware Aurora R13 does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

The Fujitsu Esprimo G558 comes with an HDMI port, while the Alienware Aurora R13 does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Alienware Aurora R13 is better equipped as it comes with 3 SATA slot(s), while the Fujitsu Esprimo G558 has 1 slot(s).

When your goal is to have the fastest SSD transfer speeds, an M.2 interface is crucial. Thus, it is good that both models have M.2 SSD slots. Today M.2 SSDs are not much more expensive than the average SATA drives, so it really does not make sense to invest in SATA drives anymore.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo G558 comes with a decent 65 Watt PSU, but the Alienware Aurora R13 has a more powerful one rated at 750 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Alienware_Aurora_R13_motherboard.jpg motherboard layoutFujitsu_Esprimo_G558_motherboard.jpg motherboard layout