Alienware Area 51 R4 vs. Dell OptiPlex 390 DT

Comparison and Differences

Alienware_Area_51_R4.jpg case front and back pannelDell_OptiPlex_390_DT.jpg case front and back pannel
Model
Form factorMid TowerDesktop
CPU optionsIntel Gen7&9&10 Core X-seriesIntel Gen2 i3/i5/i7; Celeron; Pentium;
ChipsetX299 PCHH61
Dedicated GPU *GeForce RTX 3090GeForce GTX 1650 Low Profile
RAMDIMM DDR4-2666/2933DIMM DDR3-1333
RAM slots42
RAM speed2933 MT/s1333 MT/s
RAM max64 GB8 GB
USB ports(8x) USB 3.0 Type A; (2x) USB-A 2.0; USB 3.1 Type C; USB 3.1 Type A;(8x)USB-A 2.0;
Video portsN/AHDMI 1.2; VGA;
Other portsRJ45; Headset; Line-Out; Line-In; S/PDFI optical; Card Reader;RJ45; Hdph; (2x) Mic; Line-Out; Line-In; PS2/COM;
Optional portsN.A.N.A.
SATA ports44
PCI slots(x3) PCIe 3.0 x16; (x2) PCIe 3.0 x8; PCIe 3.0 x4;PCIe 2.0 x16; (3x) PCIe 2.0 x1;
M.2 slotsM.2 2230 (WiFi/BT); M.2 2280 M-key (PCIe 3.0 x2, NVMe);N.A.
Drive bays(2x) 2.5in; (x3) 3.25in; 5.25in;3.5in; 5.25in;
PSU850/1500 W250 W
Weight28 kg (61.73 lbs)7.56 kg (16.67 lb)
Released20152011
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Alienware Area 51 R4 and Dell OptiPlex 390 DT

If you are looking for a more modern desktop, then you should go with the Alienware Area 51 R4 which was released in 2015. The Dell OptiPlex 390 DT is older and entered production in 2011.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Alienware Area 51 R4 as it is running a newer generation CPU. This is not to say that Dell OptiPlex 390 DT is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Alienware Area 51 R4 has 4 RAM slots while the Dell OptiPlex 390 DT has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Alienware Area 51 R4 is using the faster 2933 MT/s RAM. The Dell OptiPlex 390 DT is slower by supporting RAM speeds of up to 1333 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Alienware Area 51 R4 as it has the ability to run 64 GB of RAM. The Dell OptiPlex 390 DT can do a bit less at max 8 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Alienware Area 51 R4 has 12 USB ports. The Dell OptiPlex 390 DT is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Alienware Area 51 R4, is that it has 2 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Dell OptiPlex 390 DT has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

Nowadays, almost every new computer comes equipped with a DisplayPort. However, none of the devices being compared here has one. Don't worry though, DisplayPort adapters are very cheap and you can get virtually any combination of conversion types.

The Dell OptiPlex 390 DT comes with an HDMI port, while the Alienware Area 51 R4 does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 4 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Alienware Area 51 R4. Sadly, the Dell OptiPlex 390 DT has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 390 DT comes with a decent 250 Watt PSU, but the Alienware Area 51 R4 has a more powerful one rated at 1500 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Alienware_Area_51_R4_motherboard.jpg motherboard layoutDell_OptiPlex_390_DT_motherboard.jpg motherboard layout