Alienware Area 51 R2 vs. Dell OptiPlex 3050 MT

Comparison and Differences

Alienware_Area_51_R2.jpg case front and back pannelDell_OptiPlex_3050_MT.jpg case front and back pannel
Model
Form factorMid TowerMini Tower
CPU optionsIntel Gen5&6 i7 Extreme/K; Xeon E5-v3/v4Intel Gen6&7 i3/i5; Pentium; Celeron;
ChipsetX99 ExpressB250
Dedicated GPU *GeForce RTX 2080 TiGeForce GTX 1650 Super
RAMDIMM DDR4-2133/2667DIMM DDR4-2133/2400
RAM slots42
RAM speed2667 MT/s2400 MT/s
RAM max64 GB32 GB
USB ports(6x) USB 3.0 Type A; (4x) USB-A 2.0;(4x) USB-A 3.0; (4x) USB-A 2.0;
Video portsN/ADisplay Port 1.2; HDMI 1.4;
Other portsRJ45; Headset; Line-Out; Line-In; S/PDFI optical/analog; Card Reader;RJ45; Headset; Line-Out;
Optional portsN.A.Serial+PS2; VGA; Media Card Reader;
SATA ports63
PCI slots(x2) PCIe 3.0 x16; (x2) PCIe 3.0 x4;PCIe 3.0 x16; (3x) PCIe x1;
M.2 slotsM.2 2230 (WiFi/BT);M.2 2280/2242 M-key (PCIe 3.0 x2, NVMe)
Drive bays(2x) 2.5in; (x3) 3.25in; 5.25in;3.5in; (2x) 2.5in; 5.25in (slim);
PSU850/1500 W240 W
Weight28 kg (61.73 lbs)7.93 kg (17.49 lb)
Released20182017
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Alienware Area 51 R2 and Dell OptiPlex 3050 MT

If you are looking for a more modern desktop, then you should go with the Alienware Area 51 R2 which was released in 2018. The Dell OptiPlex 3050 MT is older and entered production in 2017.

If you are looking for the smaller form factor the Alienware Area 51 R2 is the right one for you. It is smaller than the Dell OptiPlex 3050 MT and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Alienware Area 51 R2 as it is running a newer generation CPU. This is not to say that Dell OptiPlex 3050 MT is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Alienware Area 51 R2 has 4 RAM slots while the Dell OptiPlex 3050 MT has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Alienware Area 51 R2 is using the faster 2667 MT/s RAM. The Dell OptiPlex 3050 MT is slower by supporting RAM speeds of up to 2400 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Alienware Area 51 R2 as it has the ability to run 64 GB of RAM. The Dell OptiPlex 3050 MT can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Alienware Area 51 R2 has 10 USB ports. The Dell OptiPlex 3050 MT is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

Unfortunately, only the Dell OptiPlex 3050 MT has a DisplayPort. The Alienware Area 51 R2 does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

The Dell OptiPlex 3050 MT comes with an HDMI port, while the Alienware Area 51 R2 does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Alienware Area 51 R2 is better equipped as it comes with 6 SATA slot(s), while the Dell OptiPlex 3050 MT has 3 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Dell OptiPlex 3050 MT. Sadly, the Alienware Area 51 R2 has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Dell OptiPlex 3050 MT comes with a decent 240 Watt PSU, but the Alienware Area 51 R2 has a more powerful one rated at 1500 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Alienware_Area_51_R2_motherboard.jpg motherboard layoutDell_OptiPlex_3050_MT_motherboard.jpg motherboard layout