Acer Veriton X6630g vs. HP ProDesk 400 G4 Mini

Comparison and Differences

Acer_Veriton_X6630g.jpg case front and back pannelHP_ProDesk_400_G4_Mini.jpg case front and back pannel
Model
Form factorSmallMicro
CPU optionsIntel Gen4 i3/i5/i7; PentiumIntel Gen8 i3/i5/i7; Celeron; Pentium;
ChipsetQ87B360
Dedicated GPU *Radeon RX 6400 Low ProfileN.A.
RAMUDIMM DDR3-1600SODIMM DDR4-2400
RAM slots42
RAM speed1600 MT/s2400 MT/s
RAM max32 GB32 GB
USB ports(4x) USB-A 3.0; (4x) USB-A 2.0;(4x)USB-A 3.0; (2x)USB-A 2.0;
Video ports(2x) DisplayPort 1.2; HDMI 1.4; VGA; DVI(2x) DisplayPort;
Other portsRJ45; (2x) Mic, Speaker; Line in; Line out; PS/2 ports; SerialRJ45; Headset; Hdph;
Optional portsSerial; Parallel; Card readerDP/HDMI/VGA/Serial/USB-C; WiFi anntena;
SATA ports41
PCI slotsPCIe 3.0 x16; PCIe 3.0 x1N.A.
M.2 slotsN.A.M.2 2280/2230 M-key (PCIe x4); M.2 2230 (WiFi/BT)
Drive bays3.5in; 5.25 inch2.5in
PSU220 W65/90/150 W
Weight10.50 kg (32.14 lb)1.77 kg (2.9 lb)
Released20132018
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Acer Veriton X6630g and HP ProDesk 400 G4 Mini

If you are looking for a more modern desktop, then you should go with the HP ProDesk 400 G4 Mini which was released in 2018. The Acer Veriton X6630g is older and entered production in 2013.

If you are looking for the smaller form factor the HP ProDesk 400 G4 Mini is the right one for you. It is smaller than the Acer Veriton X6630g and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the HP ProDesk 400 G4 Mini as it is running a newer generation CPU. This is not to say that Acer Veriton X6630g is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Acer Veriton X6630g has 4 RAM slots while the HP ProDesk 400 G4 Mini has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The HP ProDesk 400 G4 Mini is using the faster 2400 MT/s RAM. The Acer Veriton X6630g is slower by supporting RAM speeds of up to 1600 MT/s. In addition, you will be able to install the same amount of RAM in both models, and most probably 32 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the Acer Veriton X6630g has 8 USB ports. The HP ProDesk 400 G4 Mini is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

The Acer Veriton X6630g comes with an HDMI port, while the HP ProDesk 400 G4 Mini does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Acer Veriton X6630g is better equipped as it comes with 4 SATA slot(s), while the HP ProDesk 400 G4 Mini has 1 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the HP ProDesk 400 G4 Mini. Sadly, the Acer Veriton X6630g has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The HP ProDesk 400 G4 Mini comes with a decent 150 Watt PSU, but the Acer Veriton X6630g has a more powerful one rated at 220 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Acer_Veriton_X6630g_motherboard.jpg motherboard layoutHP_ProDesk_400_G4_Mini_motherboard.jpg motherboard layout