Acer Veriton X4630g vs. Dell OptiPlex 9010 MT

Comparison and Differences

Acer_Veriton_X4630g.jpg case front and back pannelDell_OptiPlex_9010_MT.jpg case front and back pannel
Model
Form factorSmallMini Tower
CPU optionsIntel Gen4 i3/i5/i7; PentiumIntel Gen2&3 i3/i5/i7; Celeron; Pentium;
ChipsetB85Q77
Dedicated GPU *Radeon RX 6400 Low ProfileGeForce GTX 1650 Super
RAMUDIMM DDR3-1600DIMM DDR3-1333/1600
RAM slots44
RAM speed1600 MT/s1600 MT/s
RAM max32 GB32 GB
USB ports(4x) USB-A 3.0; (4x) USB-A 2.0(4x) USB-A 3.0; (6x) USB-A 2.0;
Video ports(2x) DisplayPort 1.2; VGA; DVI(2x) DisplayPort 1.1; VGA;
Other portsRJ45; (2x) Mic, Speaker; Line in; Line out; PS/2 ports; SerialSerial; (2x) PS2; RJ45; Hdph; Mic; Line-Out; Line-In;
Optional portsParallel; SerialN.A.
SATA ports44
PCI slotsPCIe 4.0 x16; PCIe 3.0 x1PCIe 3.0 x16; PCIe 2.0 x1; PCI; PCIe 2.0 x16 (wired x4);
M.2 slotsN.A.N.A.
Drive bays3.5in; 5.25 inch slim(2x) 3.5in/2.5in; (2x) 5.25in
PSU220 WATX 275 W
Weight8.00 kg (17.80 lb)9.4 kg (20.68 lb)
Released20132012
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Acer Veriton X4630g and Dell OptiPlex 9010 MT

If you are looking for a more modern desktop, then you should go with the Acer Veriton X4630g which was released in 2013. The Dell OptiPlex 9010 MT is older and entered production in 2012.

If you are looking for the smaller form factor the Acer Veriton X4630g is the right one for you. It is smaller than the Dell OptiPlex 9010 MT and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Acer Veriton X4630g as it is running a newer generation CPU. This is not to say that Dell OptiPlex 9010 MT is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (4 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

None of the desktops has an advantage when it comes to the speed of the RAM being used. Both models support RAM speeds of up to 1600. In addition, you will be able to install the same amount of RAM in both models, and most probably 32 GB of RAM will be enough for most people. However, if you will be needing more RAM, make sure to check other desktop models too.

Ports

In total the Dell OptiPlex 9010 MT has 10 USB ports. The Acer Veriton X4630g is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA slots are located on the motherboard and it is where SSD, HDD and Optical Disk Drives are connected. Each of the two models being compared have 4 SATA slot(s). Keep in mind that having too few SATA slots might limit your options for connecting additional memory drives.

M.2 SSD interface allows you to transfer data with higher speeds compared to the old SATA interface. Unfortunately, neither the Dell OptiPlex 9010 MT, nor the Acer Veriton X4630g has one. However, you can still use a SATA SSD drive which should give you satisfactory performance.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Acer Veriton X4630g comes with a decent 220 Watt PSU, but the Dell OptiPlex 9010 MT has a more powerful one rated at 275 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Acer_Veriton_X4630g_motherboard.jpg motherboard layoutDell_OptiPlex_9010_MT_motherboard.jpg motherboard layout