Acer Veriton X2631g vs. Dell OptiPlex 390 MT

Comparison and Differences

Acer_Veriton_X2631g.jpg case front and back pannelDell_OptiPlex_390_MT.jpg case front and back pannel
Model
Form factorSmallMini Tower
CPU optionsIntel Gen4 i3/i5/i7Intel Gen2 i3/i5/i7; Celeron; Pentium;
ChipsetH81H61
Dedicated GPU *Radeon RX 6400 Low ProfileGeForce GTX 1650 Super
RAMUDIMM DDR3-1600DIMM DDR3-1333
RAM slots22
RAM speed1600 MT/s1333 MT/s
RAM max16 GB8 GB
USB ports(2x) USB-A 3.0; (4x) USB-A 2.0(8x)USB-A 2.0;
Video portsVGA: DVIHDMI 1.2; VGA;
Other portsRJ45; (2x) Mic, Speaker; Line in; Line out; PS/2 ports; SerialRJ45; Hdph; (2x) Mic; Line-Out; Line-In; PS2/COM;
Optional portsParallel; Card readerN.A.
SATA ports34
PCI slotsPCIe 4.0 x16; (2x) PCIe 3.0PCIe 2.0 x16; (3x) PCIe 2.0 x1;
M.2 slotsN.A.N.A.
Drive bays3.5in; 5.25 inch slim(2x) 3.5in; (2x) 5.25in;
PSU220 W265 W
Weight4.00 kg (8.80 lb)8.87 kg (19.55 lb)
Released20132011
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Acer Veriton X2631g and Dell OptiPlex 390 MT

If you are looking for a more modern desktop, then you should go with the Acer Veriton X2631g which was released in 2013. The Dell OptiPlex 390 MT is older and entered production in 2011.

If you are looking for the smaller form factor the Acer Veriton X2631g is the right one for you. It is smaller than the Dell OptiPlex 390 MT and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Acer Veriton X2631g as it is running a newer generation CPU. This is not to say that Dell OptiPlex 390 MT is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

Both models have have equal amount of ram slots (2 RAM). Usually two RAM slots are more than enough for most cases. However, the count should be taken into account when planning how much and what combination of RAM you are going to need for your system.

The Acer Veriton X2631g is using the faster 1600 MT/s RAM. The Dell OptiPlex 390 MT is slower by supporting RAM speeds of up to 1333 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Acer Veriton X2631g as it has the ability to run 16 GB of RAM. The Dell OptiPlex 390 MT can do a bit less at max 8 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Dell OptiPlex 390 MT has 8 USB ports. The Acer Veriton X2631g is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

Nowadays, almost every new computer comes equipped with a DisplayPort. However, none of the devices being compared here has one. Don't worry though, DisplayPort adapters are very cheap and you can get virtually any combination of conversion types.

The Dell OptiPlex 390 MT comes with an HDMI port, while the Acer Veriton X2631g does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Dell OptiPlex 390 MT is better equipped as it comes with 4 SATA slot(s), while the Acer Veriton X2631g has 3 slot(s).

M.2 SSD interface allows you to transfer data with higher speeds compared to the old SATA interface. Unfortunately, neither the Dell OptiPlex 390 MT, nor the Acer Veriton X2631g has one. However, you can still use a SATA SSD drive which should give you satisfactory performance.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Acer Veriton X2631g comes with a decent 220 Watt PSU, but the Dell OptiPlex 390 MT has a more powerful one rated at 265 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Acer_Veriton_X2631g_motherboard.jpg motherboard layoutDell_OptiPlex_390_MT_motherboard.jpg motherboard layout