Acer Veriton S6610g vs. Fujitsu Esprimo P558

Comparison and Differences

Acer_Veriton_S6610g.jpg case front and back pannelFujitsu_Esprimo_P558.jpg case front and back pannel
Model
Form factorMini TowerMini Tower
CPU optionsIntel Gen2 i3/i5/i7; PentiumIntel Gen8&9 i3/i5/i7; Pentium; Celeron
ChipsetQ67H310
Dedicated GPU *GeForce GTX 1650 SuperGeForce GTX 1650 Super
RAMUDIMM DDR3-1333UDIMM DDR4-2666
RAM slots42
RAM speed1333 MT/s2666 MT/s
RAM max16 GB32 GB
USB ports(10x) USB-A 2.0(4x) USB-A 3.0; (4x) USB-A 2.0
Video portsDisplayPort 1.2; DVI; VGADisplayPort 1.2; DVI
Other portsRJ45; (2x) Mic, Headset; Line in; Line out; PS/2 ports; SerialRJ45; Headphones; Mic; Line in; Line out; PS/2
Optional portsParallel; SerialVGA; eSATA
SATA ports23
PCI slotsPCIe 2.0 x16; PCIe 2.0 x1; (2x) PCIPCIe 3.0 x16; (2x) PCIe 2.0 x1; PCIe 2.0 x16 (wired x4)
M.2 slotsN.AM.2 2280/2230 M-key (PCIe 2.0 x2, NVMe)
Drive bays(4x) 3.5in; 5.25 inch(3x) 3.5in; 2.5in; (2x) 5.25 inch
PSU300 W210/280 W
Weight7.00 kg (15.40 lb)7.40 kg (16.31 lb)
Released20122018
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Acer Veriton S6610g and Fujitsu Esprimo P558

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo P558 which was released in 2018. The Acer Veriton S6610g is older and entered production in 2012.

Both models have the same form factor, meaning reoughtly they have the same phiysical size and form.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo P558 as it is running a newer generation CPU. This is not to say that Acer Veriton S6610g is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Acer Veriton S6610g has 4 RAM slots while the Fujitsu Esprimo P558 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Fujitsu Esprimo P558 is using the faster 2666 MT/s RAM. The Acer Veriton S6610g is slower by supporting RAM speeds of up to 1333 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Fujitsu Esprimo P558 as it has the ability to run 32 GB of RAM. The Acer Veriton S6610g can do a bit less at max 16 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Acer Veriton S6610g has 10 USB ports. The Fujitsu Esprimo P558 is inferior in this regard and packs 8 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. None of the desktop models has a USB 3.1 port (10Gb/s), so if you need a fast connection to your peripherals, like external Solid State Drive, you will need to look elsewhere.

The DisplayPort is usually the more popular video port used with desktops and laptops, while the HDMI is used predominantly in consumer electronics. That's why, it is good to see that both of the models come with a DisplayPort.

None of the models has an HDMI port. If your monitor supports only the HDMI interface, you will need to buy an adapter. Such adapters are cheap so nothing to worry about.

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Fujitsu Esprimo P558 is better equipped as it comes with 3 SATA slot(s), while the Acer Veriton S6610g has 2 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Fujitsu Esprimo P558. Sadly, the Acer Veriton S6610g has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo P558 comes with a decent 280 Watt PSU, but the Acer Veriton S6610g has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Acer_Veriton_S6610g_motherboard.jpg motherboard layoutFujitsu_Esprimo_P558_motherboard.jpg motherboard layout