Acer Veriton M2630g vs. Fujitsu Esprimo G5010

Comparison and Differences

Acer_Veriton_M2630g.jpg case front and back pannelFujitsu_Esprimo_G5010.jpg case front and back pannel
Model
Form factorMini TowerMicro
CPU optionsIntel Gen4 i3/i5/i7; PentiumIntel Gen10 i3/i5
ChipsetH81H410
Dedicated GPU *GeForce GTX 1650 SuperN.A.
RAMUDIMM DDR3-1600SODIMM DDR4-2933
RAM slots42
RAM speed1600 MT/s2933 MT/s
RAM max32 GB64 GB
USB ports(6x) USB-A 2.0(3x) USB-A 3.0; (3x) USB-A 2.0; USB-C 3.0
Video portsDVI; VGADisplayPort 1.2; HDMI 1.4b
Other portsRJ45; (2x) Mic, Speaker; Line in; Line out; PS/2 ports; SerialRJ45; Headset
Optional portsCard reader; USB-A 3.0; Parallel; SerialVGA
SATA ports41
PCI slotsPCIe 3.0 x16; (2x) PCIe 2.0 x1; PCIN.A.
M.2 slotsN.A.M.2 2280/2230 M-key (PCIe 3.0 x4, NVMe); M.2 2230 (WiFi/BT)
Drive bays(4x) 3.5in; (2x) 5.25 inch2.5in
PSU300 W65 W
Weight7.00 kg (15.40 lb)0.80 kg (1.76 lb)
Released20132020
Manuallinklink
Price**Check PriceCheck Price

** As an Amazon associate we earn from qualifying purchases.
* Dedicated GPU warning: Check if your particular power supply model has enough power. Additionally some PSUs don't come with an auxiliary PCIe power connector and you may need to buy a SATA to PCIe power adapter.

Differences between Acer Veriton M2630g and Fujitsu Esprimo G5010

If you are looking for a more modern desktop, then you should go with the Fujitsu Esprimo G5010 which was released in 2020. The Acer Veriton M2630g is older and entered production in 2013.

If you are looking for the smaller form factor the Fujitsu Esprimo G5010 is the right one for you. It is smaller than the Acer Veriton M2630g and will fit more easily under your desk.

Processor

Usually the newer the generation of the CPU, the better the performance and efficiency is. If your budget allows it, you should go with the Fujitsu Esprimo G5010 as it is running a newer generation CPU. This is not to say that Acer Veriton M2630g is bad - it can still run some powerful CPUs, albeit being an older generation.

Memory

The Acer Veriton M2630g has 4 RAM slots while the Fujitsu Esprimo G5010 has only 2 slot(s). This is not something to worry about. Just make sure you take it into consideration when planning how much RAM you are going to use.

The Fujitsu Esprimo G5010 is using the faster 2933 MT/s RAM. The Acer Veriton M2630g is slower by supporting RAM speeds of up to 1600 MT/s. Additionally, if you will be needing a lot of RAM, better go for the Fujitsu Esprimo G5010 as it has the ability to run 64 GB of RAM. The Acer Veriton M2630g can do a bit less at max 32 GB. Most of the times, this should be sufficient for the majority of users.

Ports

In total the Fujitsu Esprimo G5010 has 7 USB ports. The Acer Veriton M2630g is inferior in this regard and packs 6 USB ports. In any case, if you miss USB ports, you can always purchase a USB hub. What is nice about the Fujitsu Esprimo G5010, is that it has 1 USB 3.1 port(s) which allows transfer of up to 10Gb/s. Unfortunately, the Acer Veriton M2630g has no such port, thus restricting your transfer speeds significantly. For people who want to use external drives on regular basis, this might be an issue.

Unfortunately, only the Fujitsu Esprimo G5010 has a DisplayPort. The Acer Veriton M2630g does not have one? Don't worry though, nowadays video adapters are cheap and you can get almost any combination of conversion types.

The Fujitsu Esprimo G5010 comes with an HDMI port, while the Acer Veriton M2630g does not support the interface. Of course missing HDMI port is something that can be easily fixed with a good adapter (e.g. DisplayPort to HDMI).

SATA ports are placed on the system board and it is where you connect your HDD, SSD and Optical Disk Drives. More SATA slots will allow you to have more drives running at the same time. In this regard the Acer Veriton M2630g is better equipped as it comes with 4 SATA slot(s), while the Fujitsu Esprimo G5010 has 1 slot(s).

If you want the fastest transfer speeds for your SSD, an M.2 interface is crucial. Thus, if the M.2 SSD slot is a mandatory requirement for you, go with the Fujitsu Esprimo G5010. Sadly, the Acer Veriton M2630g has no such slot, and you will be forced to use the SATA interface instead.

Make sure that the available M.2 slot supports the PCIe (also called NVMe) interface. This is important as there are M.2 slots which support only the inferior SATA III interface. For comparison, the SATA III interface has max speeds of 6Gb/s, while the PCIe 3.0 x4 will support speeds up to 32Gb/s!

Power Supply

Having a Power Supply Unit with high power rating is important, if you are going to use components which require extra power. The Fujitsu Esprimo G5010 comes with a decent 65 Watt PSU, but the Acer Veriton M2630g has a more powerful one rated at 300 Watts. Choosing either one depends on your specific requirements and use case. Also don't forget that some models might have more than one PSU option - try to always get the most powerful one, especially if you plan to upgrade to a powerful GPU.

Motherboard

Acer_Veriton_M2630g_motherboard.jpg motherboard layoutFujitsu_Esprimo_G5010_motherboard.jpg motherboard layout