image of WD SN750 SE M.2 SSD

WD SN750 SE

SSD Specification and Info

WD SN750 SE is an Entry-Level NVMe SSD produced and sold by WD. The device comes with x4 PCIe 4.0/NVMe interface and M.2 form factor - a good fit for both desktop and laptop computers. This SSD has a maximum sequential read-write speed of up to 3600/2830 MB per second, making it ideal for gaming and workstation PCs.

Due to its lack of DRAM memory, WD SN750 SE has slight disadvantages over SSDs with DRAM memory. This SSD is using a TLC NAND flash memory with 96 cell layers.


Specification

Model
Interfacex4 PCIe 4.0/NVMe
Form factorM.2
Capacity250GB-1TB
ControllerPhison E19T
ConfigurationSingle R5 + CoX, 4-ch, 8-CE/ch
DRAMNo
HMBYes
NAND brandSanDisk
NAND typeTLC
Layer96
R/W speed3600/2830 MB/s
TierEntry-Level NVMe
ManualWD SN750 SE

NAND type

WD SN750 SE is using a TLC (3 bits per cell) NAND manufacurted by SanDisk with 96 cell layers on top of each other.

The TLC is the most common type of SSD NAND flash memory found on the market at the moment. It is faster, less durable, but still cheaper than the other, more expensive variants - SLC and MLC.

The main advantage of this type of NAND chips is the fact that the cost per gigabyte is much lower, allowing high capacity SSDs at affordable price.

The Controller

WD SN750 SE is using Phison E19T SSD controller to connect the NAND memory to the x4 PCIe 4.0/NVMe interface. The controller has Single R5 + CoX, 4-ch, 8-CE/ch configuration.

Typically, SSD controllers are microprocessors. In this case we have Single R5 + CoX, 4-ch, 8-CE/ch processor responsible for controlling the SSD in such way, so that the data coming from the interface can be stored on to the NAND flash memory.

Some SSDs have simpler controllers with fewer communication channels and less cores.

Among other things, the controller also manages the SLC caching, optimizing the DRAM cache, encryption, LDPC, garbage collection, wear-leveling as well as TRIM

DRAM Cache

WD SN750 SE has no separate DRAM chip to store the SD mapping tables to speeds up the data access.

As soon as the OS requests some data from the SSD, the SSD needs to know exactly where it is on the drive. Because garbage collection moves the data constantly, the controller relies on the mapping tables to locate it.

These tables are stored in DRAM cache, where they are accessed much more quickly than in NAND flash.

Therefore, SSDs with DRAM-less architecture have more random write and read operations. This makes the device perform worse and last shorter if they are not HMB enabled.

HMB Support

WD SN750 SE has a DRAM-less architecuter and it is using a host memory buffer (HMB) to store the mapping tables.

The HBM is used to reduce the cost of production of NVMe SSDs with DRAM Cache, SSDs with this type of controllers can leverages the host system's DRAM instead of an onboard DRAM chip to host the FTL mapping table used by flash storage.